[asterisk-users] Re: Any way to go from factory reset 7970 to SIP without Call Manager?

[Jason Lixfeld]

On 1-Sep-06, at 3:41 AM, Tomislav Parčina wrote:

> In article <789F4276-C01C-40B4-BC11-CA39AC5A80EE at lixfeld.ca>, jason 
> +lists.asterisk at lixfeld.ca says...
>> I've been having some problems with a couple of 7970G so I decided to
>> factory them.  In doing so, it seems to have rendered the phones
>> unbootable as they (as I understand it) are factory'd with some
>> version of SCCP code, which makes it constantly looking for
>> term70.default.loads file which it never seems to be able to pick up
>> from the tftp server.  It just seems to keep rebooting itself with a
>> blank, dark screen.  I spoke to Cisco who said it's not possible to
>> load a SIP version of software without Call Manager.  Is this true?
>
> No, it isn't true. On this web page you can find explanation how to  
> upgrade to SIP firmware. Use 8.0.2, because 8.0.4 doesn't register  
> with Asterisk.
> http://www.voip-info.org/wiki/view/Asterisk+phone+cisco+7970+SIP
>
> I'm using "Another SEP<mac>.xml.cnf example" from that web page.

Ya, I used that as an example too when I started, so I have  
SEP<MAC>.xml.cnf but the phone doesn't appear to be requesting it.   
It's only looking for term70.default.loads.

>
>
> --
> Tomislav Parčina
> Lama Computers Split
> Stinice 12, 21000 Split
> Tel.: +385(21)495148
> Mob.: +385(91)1212148
> SIP: tomo at pbx.lama.hr
> e-mail: tparcina#lama.hr
> http://www.lama.hr
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>