No subject

signals if it's the calling party, so the act of flashing somehow makes it
think that it is now the calling party, so DTMF signals were sent. Not sure
if that is a bug or a feature with a certain design consideration. I
discovered that method quite by accident, really, since I can't find any
documentation about that method in the user manual.
----- Original Message ----- 
From: "Dennis Cartier" <dennis.cartier at gmail.com>
To: <asterisk-users at lists.digium.com>
Sent: Sunday, August 15, 2004 7:51 PM
Subject: Re: Re: [Asterisk-Users] Re: GS HandyTone-286 Transfer Problem, can
anyone confirm?


> Thanks!!! That works. A bit cumbersome but at least it works.
>
> Why does putting someone on hold and then taking them off again make
> the ATA (or *) recognize the # key as transfer?
>
> Thankyou for your help
>
> On Sun, 15 Aug 2004 11:49:50 +0800, MPlus <meritplus at time.net.my> wrote:
> > For blind transfers, press flash twice, then press #.
> > For consultative transfers, press flash once, talk to the other party
and
> > tells him to hangup, press flash again, then press #.
> >
> >
> >
> > ----- Original Message -----
> > From: "Dennis Cartier" <dennis.cartier at gmail.com>
> > To: <asterisk-users at lists.digium.com>
> > Sent: Sunday, August 15, 2004 2:10 AM
> > Subject: Re: Re: [Asterisk-Users] Re: GS HandyTone-286 Transfer Problem,
can
> > anyone confirm?
> >
> > > Unfortunately the Cisco ATA-186 does not support iLBC which means
> > > extra costs for purchasing 729 licenses. The ATA-286 works fine other
> > > than this 1 issue.
> > >
> > > Do the Grandstream developers follow this list?? This problem has been
> > > persistent for a LONG time and each new firmware version still has it
> > > unfixed!!
> > >
> > >
> > > On Sat, 14 Aug 2004 19:36:43 +0300, Lubomir Christov
> > > <voip at minitelecom.org> wrote:
> > > >
> > > > Yes, we are experiencing the same problem and because of that we
> > > > switched the called HT ata to Cisco ATA 186 ...
> > > >
> > > > Lubo
> > > >
> > > >
> > > >
> > > > Andy Lee wrote:
> > > > > [ Message pasted from Sun, 7 Mar 2004 08:27:54 -0600 ]
> > > > >
> > > > >>The problem I'm experiencing with many GS adapters, regardless of
> > > > >>firmware version is this.  Call from one phone to another phone
using
> > > > >>both the 'T' and 't' flags in the Dial() command.  After they are
> > > > >>connected, you should be able to press '#' on either phone to hear
> > > > >>"transfer".  What I am experiencing is the calling GS adapter will
> > > > >>hear "transfer" when they press '#', but when the receiving GS
adapter
> > > > >>presses '#', nothing happens at all.  Are you able to repeat this?
If
> > > > >>not, can you please tell me the firmware revisions and Asterisk
> > > > >>version that you are using?
> > > > >>
> > > > >>Thank you very much.
> > > > >
> > > > >
> > > > > Yes, I am experiencing the same problem. Works fine with the
> > > > > BudgetTone phones but not with the HandyTone-286.
> > > > >
> > > > > Have you resolved this yet? We've been trying to figure this out
on
> > > > > and off for the past couple of weeks.
> > > > > _______________________________________________
> > > > > Asterisk-Users mailing list
> > > > > Asterisk-Users at lists.digium.com
> > > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > > To UNSUBSCRIBE or update options visit:
> > > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > >
> > > > >
> > > >
> > > > --
> > > >
> > > > ---------
> > > > Appradius Project: RADIUS authentication and accounting support for
> > > > Asterisk PBX
> > > > http://appradius.minitelecom.org/
> > > > ---------
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > To UNSUBSCRIBE or update options visit:
> > > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users