[asterisk-users] Polycom provision errors still! Arg!

[Andrew Joakimsen]

What if you just use the default configuration files?

On 10/23/06, Curt Shaffer <cshaffer at gmail.com> wrote:
>
>  I have been struggling over central provisioning for quite some time. I
> have eagerly watched each post with like problems but have yet to find a
> reliable answer.
>
>
>
> I have a Polycom 501 and I am trying to provision from an FTP server, and
> just to take any routing out of the issue it is on the same subnet. I am
> running the 2.0.1.0291 firmware and 3.2.2 bootrom. I set the IP info on
> the phone and point it at the ftp server. It successfully loaded the new
> firmware and bootrom but will not provision. Every time it gives me Config
> file error: The error is 0x0 after the page that says Processing
> Configuration This may take a minute.
>
>
>
> Here is my ftp log:
>
>
>
> Mon Oct 23 11:53:18 2006 1 x.x.x.x 339 /home/pcom/0004f2027255.cfg b _ o
>
> r pcom ftp 0 * c
>
> Mon Oct 23 11:53:19 2006 1 x.x.x.x 10240 /home/pcom/sip.ld b _ o r pcom f
>
> tp 0 * i
>
> Mon Oct 23 11:53:19 2006 1 x.x.x.x 0 /home/pcom/x102\x102.cfg b _ o r pco
>
> m ftp 0 * i
>
> Mon Oct 23 11:53:27 2006 6 x.x.x.x 121872 /home/pcom/sip.cfg b _ o r pcom
>
>  ftp 0 * c
>
> Mon Oct 23 11:54:07 2006 1 x.x.x.x 9638 /home/pcom/x102/0004f2027255-boot
>
> .log b _ i r pcom ftp 0 * c
>
>
>
> Here is the boot log:
>
>
>
> |---------- Initial log entry ----------
>
> 1023201556|so   |4|00|+++ Note that bootrom log times are in GMT +++
>
> 1023201556|hw   |4|00|Initial log entry.
>
> 1023201556|wdog |4|00|Initial log entry
>
> 1023201556|cfg  |4|00|Initial log entry
>
> 1023201556|copy |3|00|Initial log entry
>
> 1023201556|cdp  |4|00|Initial log entry
>
> 1023201556|cdp  |5|00|CDP is DISABLED.
>
> 1023201556|cdp  |5|00|802.1Q/VLAN tagging is DISABLED.
>
> 1023201556|so   |3|00|Platform: Model=SoundPoint IP 501,
> Assembly=2345-11500-040 Rev=A
>
> 1023201556|so   |3|00|Platform: Board=2345-11500-040 A
>
> 1023201556|so   |3|00|Platform: MAC=0004f2027255, IP=172.16.27.10, Subnet
> Mask=255.255.255.224
>
> 1023201556|so   |3|00|Platform: BootBlock=2.5.0 (11500_040) 06-Nov-04
> 08:08
>
> 1023201556|so   |3|00|Application, main: Label=BOOT, Version=3.2.2.001924-Aug-06 18:05
>
> 1023201556|so   |3|00|Application, main: P/N=3150-11069-322
>
> 1023201556|app1 |4|00|Initial log entry.
>
> 1023201556|app1 |3|00|DNS resolver servers are 'x.x.x.x' x.x.x.x'
>
> 1023201556|app1 |3|00|DNS resolver search domain is ''
>
> 1023201556|app1 |3|00|Bootline: eim(0,0)bootHost:flash e=
> 172.16.27.10:ffffffe0 h=172.16.27.6 g=172.16.27.1 u=pcom pw=****
> tn=CircaIP
>
> 1023201827|app1 |3|00|Time has been set from x.x.x.x (x.x.x.x).
>
> 1023201827|so   |3|00|Link status is Net up Speed 100 full Duplex, PC up
> Speed 100 full Duplex.
>
> 1023201833|cfg  |3|00|Beginning to provision phone
>
> 1023201833|copy |3|00|'ftp://pcom:****@172.16.27.6/bootrom.ld' from '
> 172.16.27.6'
>
> 1023201903|cfg  |3|00|Image bootrom.ld has not changed
>
> 1023201903|copy |3|00|Download of 'bootrom.ld' succeeded on attempt 1
> (addr 1 of 1)
>
> 1023201903|cfg  |3|00|Downloaded bootROM is identical to Current version
> 3.2.2
>
> 1023201903|copy |3|00|'ftp://pcom:****@172.16.27.6/0004f2027255.cfg' from
> '172.16.27.6'
>
> 1023201939|copy |3|00|Download of '0004f2027255.cfg' succeeded on attempt
> 1 (addr 1 of 1)
>
> 1023201939|copy |3|00|'ftp://pcom:****@172.16.27.6/sip.ld' from '
> 172.16.27.6'
>
> 1023202009|cfg  |3|00|Image sip.ld has not changed
>
> 1023202009|copy |3|00|Download of 'sip.ld' succeeded on attempt 1 (addr 1
> of 1)
>
> 1023202009|cfg  |3|00|Downloaded application image is identical to current
> version
>
> 1023202009|cfg  |3|00|Phone successfully provisioned
>
> 1023202041|app1 |4|00|Loaded application sip.ld successfully, errors 0x0.
>
> 1023202041|app1 |6|00|Uploading boot log, time is MON OCT 23 20:20:42 2006
>
>
>
> And it repeats this every time.
>
>
>
> I can provide the sip.cfg and <mac>.cfg on request. I don't want to run
> out of space for the post.
>
>
>
>
>
> Please help! It really can't be this hard.
>
>
>
> Curt
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20061023/8e0f49e4/attachment.htm