[asterisk-users] Is 1.2.12.1 production ready

[shadowym]

Thanks for the info.  It's certainly encouraging.

-----Original Message-----
From: Noah Miller [mailto:noahisaacmiller at gmail.com] 
Sent: Tuesday, October 17, 2006 1:09 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Is 1.2.12.1 production ready

> I am getting ready to image a production system.  Right now I am 
> planning on using Centos 4.4, Asterisk 1.2.12.1, Freepbx 2.1.3.  I 
> will be using a Sangoma A200D card.
>
> I read of some people having problems with Asterisk 1.2.12.1 crashing.  
> Is this across the board or is there anyone out there with no 
> problems.  If you have 24/7 uptime and no nightly reboot crons I would 
> definitely appreciate hearing  about it.

I suspect that for every problem you hear about on the list there are
probably 100 other happy asterisk administrators.  Not to downplay
legitimate issues, but many times, instabilities can easily be attributed to
the OS, hardware or a million other things not caused by asterisk.

I installed 1.2.12.1 for one of my clients about 1 week after it was
released. No cron reboots, and no issues.  The install is 6 different boxes
in 6 different locations.  Before that they were running 1.2.11, no cron
reboots, no issues. Before that 1.2.10, no cron reboots, no issues.  Before
that, etc, etc.  Last time I've seen any real problem that would cause
asterisk to stop working was 1.2.2 which had a major bug.

- Noah



On 10/17/06, Faris Raouf <asterisk at raouf.net> wrote:
> Just in case it helps anyone:
>
> We had 1.2.12.1 crashing on us on a daily basis, and sometimes several 
> times a day.
>
> I found that by disabling all qualify lines in iax.conf and sip.conf 
> the problem went away.
>
> Faris.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>