[asterisk-users] Problem with ZAPTEL-1.4.0-beta1 and WCT100P card

[Matthew Crocker]

Hello,

  I'm trying to upgrade an Asterisk 1.2 linux box to Asterisk 1.4.  I  
installed the following

-rw-r--r--  1 root root 10908541 Sep 21 13:25 asterisk-1.4.0- 
beta2.tar.gz
-rw-r--r--  1 root root   993921 Sep 21 13:25 asterisk-addons-1.4.0- 
beta1.tar.gz
-rw-r--r--  1 root root    80019 Sep 21 13:25 libpri-1.4.0-beta1.tar.gz
-rw-r--r--  1 root root  1523413 Sep 21 13:25 zaptel-1.4.0-beta1.tar.gz

I get an error when I run ztcfg.  (see below).   Any ideas?  Is the  
ztcfg issue with unable to read version info a problem?


[root at asterisk-1 src]# ztcfg -d 99 -v
Line 11: span=1,1,1,esf,b8zs
Line 12: bchan=1-23
Line 13: dchan=24
Line 17: loadzone       = us
Line 18: defaultzone    = us
<End of File>
Notice: Configuration file is /etc/zaptel.conf
line 18: Unable to read Zaptel version information.

Zaptel Version: môy
Echo Canceller:
Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 133-266 feet (DSX-1)

24 channels configured.

ZT_CHANCONFIG failed on channel 1: Inappropriate ioctl for device (25)


[root at asterisk-1 src]# strace ztcfg
execve("/sbin/ztcfg", ["ztcfg"], [/* 25 vars */]) = 0
uname({sys="Linux", node="asterisk-1", ...}) = 0
brk(0)                                  = 0x8437000
open("/etc/ld.so.preload", O_RDONLY)    = -1 ENOENT (No such file or  
directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=38549, ...}) = 0
old_mmap(NULL, 38549, PROT_READ, MAP_PRIVATE, 3, 0) = 0xf6ff6000
close(3)                                = 0
open("/lib/tls/libm.so.6", O_RDONLY)    = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\203 
\206"..., 512) = 5
12
fstat64(3, {st_mode=S_IFREG|0755, st_size=214796, ...}) = 0
old_mmap(0x865000, 139424, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =  
0x865000
old_mmap(0x886000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,  
3, 0x20000
) = 0x886000
close(3)                                = 0
open("/lib/tls/libc.so.6", O_RDONLY)    = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300ku 
\000"..., 512) = 5
12
fstat64(3, {st_mode=S_IFREG|0755, st_size=1455084, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,  
-1, 0) = 0
xf6ff5000
old_mmap(0x742000, 1158124, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =  
0x742000
old_mmap(0x857000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE| 
MAP_FIXED, 3, 0x1150
00) = 0x857000
old_mmap(0x85b000, 7148, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED| 
MAP_ANONYMO
US, -1, 0) = 0x85b000
close(3)                                = 0
mprotect(0x857000, 8192, PROT_READ)     = 0
mprotect(0x886000, 4096, PROT_READ)     = 0
mprotect(0x73e000, 4096, PROT_READ)     = 0
set_thread_area({entry_number:-1 -> 6, base_addr:0xf6ff5820, limit: 
1048575, seg_
32bit:1, contents:0, read_exec_only:0, limit_in_pages:1,  
seg_not_present:0, usea
ble:1}) = 0
munmap(0xf6ff6000, 38549)               = 0
open("/dev/zap/ctl", O_RDWR)            = 3
brk(0)                                  = 0x8437000
brk(0x8458000)                          = 0x8458000
brk(0)                                  = 0x8458000
open("/etc/zaptel.conf", O_RDONLY)      = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=330, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,  
-1, 0) = 0xf6
fff000
read(4, "# Autogenerated by ./genzaptelco"..., 4096) = 330
read(4, "", 4096)                       = 0
close(4)                                = 0
munmap(0xf6fff000, 4096)                = 0
ioctl(3, 0x40244a12, 0x8078560)         = 0
ioctl(3, 0x80844a05, 0xfeec3140)        = -1 EINVAL (Invalid argument)
ioctl(3, 0x404c4a13, 0x80797ac)         = -1 ENOTTY (Inappropriate  
ioctl for dev
ice)
write(2, "ZT_CHANCONFIG failed on channel "..., 71ZT_CHANCONFIG  
failed on channe
l 1: Inappropriate ioctl for device (25)
) = 71
close(3)                                = 0
exit_group(1)                           = ?

[root at asterisk-1 src]# cat /etc/zaptel.conf
# Autogenerated by ./genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order


# Span 1: WCT1/0 "Digium Wildcard T100P T1/PRI Card 0"
span=1,1,1,esf,b8zs
bchan=1-23
dchan=24

# Global data

loadzone        = us
defaultzone     = us

[root at asterisk-1 src]# cat /etc/asterisk/zapata.conf
switchtype=national
context=default
signalling=pri_net
group=1
channel => 1-23

--
Matthew S. Crocker
Vice President
Crocker Communications, Inc.
Internet Division
PO BOX 710
Greenfield, MA 01302-0710
http://www.crocker.com