[asterisk-users] (OT) HylaFAX, IAXModem, Asterisk

[mail-lists]

Steve Totaro wrote:
> Doug Lytle wrote:
>> Steve Totaro wrote:
>>
>> Steve,
>>
>> You neglet to mention:
>>
>>    Distro
>>    Version of HylaFAX
>>    Version of iaxmodem
>>    Version of Asterisk
>>    How you're connecting to the PSTN (From previous conversations, 
>> I'm guessing PRI)
>>
>> I can't say that I'm not experiencing the same issue as you, 99% of 
>> our faxes are incoming.
>>
>> I'm running 23 iaxmodems along with HylaFAX 4.3.0.12 on a PRI and 
>> Asterisk 1.2.12.1, running on Mandriva 2006. My setting below:
>>
>> [iaxmodem]
>>
>> device          /dev/ttyIAX01
>> port            4599
>> refresh         60
>> server          127.0.0.1
>> record
>> peername        iaxmodem.com01
>> secret          12345
>> cidname         WhereIWork
>> cidnumber       269xxxxxxx
>> codec           slinear
>>
>> [Asterisk]
>>
>> [iaxmodem.com01] ; Software modem COM01
>> type=friend
>> host=dynamic
>> trunk=no
>> allowcallerid=yes
>> disallow=all
>> allow=slinear
>> secret=12345
>> qualify=no
>> trunk=no
>> context=sip
>>
>> [HylaFAX]
>>
>> ModemType:              Class1          # use this to supply a hint
>> ModemSetOriginCmd:      AT+VSID="%s","%d"
>>
>> Class1AdaptRecvCmd:     AT+FAR=1
>> Class1TMConnectDelay:   400             # counteract quick CONNECT 
>> response
>>
>> Class1RMQueryCmd:       "!24,48,72,96"  # enable this to disable V.17
>> ModemResetCmds:         AT+VCID=1       # enables CallID display
>>
> I am running on CentOS 4.4, Asterisk 1.2.10, hylafax-4.3.0-2, 
> iaxmodem-0.1.10.
>
> Your config.tty files are much shorter than mine.  I think I used the 
> addfax script instead of copying the sample from iaxmodem.
>
> I guess it is time to upgrade a few components and try again.
>
> Thanks,
> Steve
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
The place to start would be upgrading your iaxmodem to at least 0.1.14. 
There are significant improvements.