[asterisk-users] Asterisk and TDM400P ?

[Noc Phibee]

Pranav Peshwe a écrit :
> Hi,
>
> Check your /etc/zaptel.conf and ensure that it has the right kind of
> signalling set for the same channel number as that in you zapata.conf.
>
> do : cat /proc/zaptel/1
> and it should show channels and the effective signalling settings for 
> them.
> If signalling does not appear here,it means that, it is not configured 
> properly,
> and loading chan_zap would fail.
>
> My first and fourth channels are configured as fxsks and the output i 
> get is :
>
> #cat /proc/zaptel/1
> Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
>
>           1 WCTDM/0/0 FXSKS
>           2 WCTDM/0/1
>           3 WCTDM/0/2
>           4 WCTDM/0/3 FXSKS
>
>
> HTH  :)
>
> Regards,
> Pranav


Thanks for your help,

a cat:
[root at gw zap]# cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"

           1 WCTDM/0/0 FXSKS
           2 WCTDM/0/1
           3 WCTDM/0/2
           4 WCTDM/0/3

in my zaptel.conf, i have only:
loadzone=fr
defaultzone=fr
fxsks=1

and zapata.conf:
[trunkgroups]

[channels]
context=default
signalling=fxs_ls
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
musiconhold=default
callerid="Filtrinov"<0477530573>
channel => 5

if i understand, my error are channel ?

In zaptel.conf, its fxsks=1
and in zapata.conf it's channel => 0

no ?