[asterisk-users] Re: Port Range

[shadowym]

Also, change the port range to 10000-10xxx in /etc/asterisk/rtp.conf and
match it up in your port forward on your firewall instead of 10000-20000
which is far more anyone is likely to need. 

-----Original Message-----
From: Eric "ManxPower" Wieling [mailto:eric at fnords.org] 
Sent: Monday, November 06, 2006 9:31 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Re: Port Range

Webmin uses UDP?  Audio is generally RTP over UDP.

Tom Vile wrote:
> That probably because you are using Webmin.  Just change the port 
> Webmin listens on instead, I use 9000.
> 
> On 11/6/06, Zeeshan Zakaria <zishanov at gmail.com> wrote:
>>
>> I'll keep that in mind for future. I read about using 10001 as start 
>> port on Nerd Vittles website.
>>
>> Is there some good material online to read more about RTP, SIP, RTCP 
>> and UTP?