[asterisk-users] siemens hipath interoperability - PRI/Q.SIG - cardrecommendation

[Pavel Jezek]

Hi Wendy,
I got this info from digium developers, that caller id name 
transfer/display (asterisk/iphone <-> pbx/clasic phone)) using 
ISDN/Q.SIG should work,
so, do you have possibility to confirm this, if it realy working in 
practice (with siemens hipath idealy)? thanks
PJ





-------- Original Message --------
Subject: 	Re: [asterisk-dev] Zaptel/Asterisk - Q.SIG status
Date: 	Tue, 31 Oct 2006 09:54:05 -0600
From: 	Matthew Fredrickson <creslin at digium.com>
Reply-To: 	Asterisk Developers Mailing List <asterisk-dev at lists.digium.com>
To: 	Asterisk Developers Mailing List <asterisk-dev at lists.digium.com>
References: 	<45474429.50809 at i.cz>



On Oct 31, 2006, at 6:40 AM, Pavel Jezek wrote:

> Hello developers,
> because too litle info about what features are currently supported 
> with Q.SIG,
> I would like to ask if "caller id name" supplementary service is 
> currently available, i.e.
> if caller id name will be displayed on ip phone when calling from pbx 
> to asterisk (through PRI and Digium card) and vice versa
> thank you

Yeah, I haven't tested it in a while, but it should work.  Just make 
sure you have in zapata.conf facilityenable=yes and switchtype=qsig.

Matthew Fredrickson

_______________________________________________







wendys at tiscali.de wrote:
> Hi,
>
> we have tested the Digium-Cards, they work fine, but don't expect to 
> much!
> Only segmentation 1 in Ecma (it is not a digium-problem)
> The Name ist displayed, but only in Hex-Code (this is due to the 
> Libpri/Zaptel Drivers but I didn't fint a way to display it in *)
> There is also very less documentation, on Asterisk.org (Features) 
> there is non Q.Sig Support offered.
> Also very less documentation through google available.
> ;-(
>
> If you find some hints, i'm also interested!
>
>
> Regards wendy
>
> ----- Original Message ----- From: "Pavel Jezek" <pavel.jezek at i.cz>
> To: <asterisk-users at lists.digium.com>
> Sent: Thursday, October 19, 2006 5:22 PM
> Subject: [asterisk-users] siemens hipath interoperability - PRI/Q.SIG 
> - cardrecommendation
>
>
>> Hello, if somebody using this scenario in production successfully, 
>> please send me info, which ISDN card for asterisk server is usefull 
>> for me (Digium, Sangoma)?
>> my crucial requirement is "caller id name" transfer/display between 
>> ISDN (Siemens PBX) and IP phone connected to asterisk
>> I'm using PRI interface and Q.SIG signaling.
>> thank you
>> PJ
>>
>>
>> _______________________________________________
>> --Bandwidth and Colocation provided by Easynews.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users 
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users