[Asterisk-Users] using a billing system

[Joao Pereira]

Its almost done....
but now Im failing to authenticate with my Telco's gateway, because the 
registration information is in sip.conf:

[my-telco]
type=friend
host=mytelco.com
disallow=all
allow=ulaw                     
allow=alaw
username=username
fromuser=username
secret=password

and I used to make SIP calls like this:
exten => _XXXXXXXXXXXX,1,Dial(SIP/${EXTEN}@my-telco)

Now, with the code you gave me, Asterisk is consulting Asterisk2Billing:

exten => _XXXXXXXXXXXX,1,Answer
exten => _XXXXXXXXXXXX,2,Wait,2
exten => _XXXXXXXXXXXX,3,DeadAGI,a2billing.php
exten => _XXXXXXXXXXXX,4,Wait,2
exten => _XXXXXXXXXXXX,5,Hangup

 but when I place the call, he fails to authenticate with my-telco
:(


How can I use the registration information that is in sip.conf and 
continue to use Asterisk2Billing ?
Thanks
Joao Pereira



William Piper wrote:

>You need to specify which context to use in the a2billing.conf. 
>Your extensions.conf should look like this:
>
>exten => _2XXXXXXXX.,1,Answer
>exten => _2XXXXXXXX.,2,Wait,2
>exten => _2XXXXXXXX.,3,DeadAGI(a2billing.php|2)
>exten => _2XXXXXXXX.,4,Wait,2
>exten => _2XXXXXXXX.,5,Hangup
>
>Also, check out http://forum.asterisk2billing.org/ for more help.
>
>bp
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Joao Pereira
>Sent: Tuesday, May 30, 2006 2:06 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion;
>vahan at arminco.com
>Subject: Re: [Asterisk-Users] using a billing system
>
>yes, a2billing.php is in agi-bin:
>
>[root at asterisk]# locate a2billing.php
>/usr/src/a2billing/Chameleon/A2Billing_AGI/a2billing.php
>/var/lib/asterisk/agi-bin/a2billing.php
>
>Could be because of the missing pcntl php extension?
>
>[root at asterisk]# rpm -qa | grep php
>php-mysql-4.3.9-3
>php-ldap-4.3.9-3
>php-odbc-4.3.9-3
>php-pgsql-4.3.9-3
>php-4.3.9-3
>php-pear-4.3.9-3
>
>
>Thanks
>Joao Pereira
>
>
>
>Vahan Yerkanian wrote:
>
>  
>
>>>    exten => _2XXXXXXXX,1,Answer
>>>    exten => _2XXXXXXXX,2,Wait,2
>>>    exten => _2XXXXXXXX,3,DeadAGI, a2billing.php
>>>    exten => _2XXXXXXXX,4,Wait,2
>>>    exten => _2XXXXXXXX,5,Hangup
>>>
>>>    I tried it and the call is answered bu Asterisk and never dials the
>>>    destination. :(
>>>      
>>>
>>Yes that's the correct way to launch A2B script. Are you a2billing.php 
>>is in your agi-bin directory? Also, you can see if the script runs 
>>without error by executing it from shell(you'll need php cli compiled 
>>and installed) and keep pressing enter key to see the script output.
>>
>>Perhaps you have your php binary in the wrong path or a missing php 
>>extension. Make sure you have pcntl php extension installed too.
>>
>>HTH,
>>Vahan
>>
>>_______________________________________________
>>--Bandwidth and Colocation provided by Easynews.com --
>>
>>Asterisk-Users mailing list
>>To UNSUBSCRIBE or update options visit:
>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>    
>>
>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>__________ NOD32 1.1443 (20060314) Information __________
>
>This message was checked by NOD32 antivirus system.
>http://www.eset.com
>
>
>  
>