[Asterisk-Users] Problem with IAX2 dialin with portunity

[Matthias Fechner]

Hi,

I'm using http://www.portunity.net/

I configured now asterisk with the following setup:
iax.conf:
register => XXXXXXX:YYYYYYY at iax.iaxport.de

[portunity-out]
type=friend
host=iax.iaxport.de
username=XXXXXXX
secret=YYYYYY
context=incoming-portunity
notransfer=yes

[guest]
type=user
context=default
;callerid="Guest IAX User"

And in extensions.conf:
[default]
;exten => s,1,DIAL(IAX2/idefix)
exten => s,1,NoOp(--- ${CALLERID} calling on portunity over IAX2
(${EXTEN}) ---)
exten => s,2,Set(LANGUAGE()=de)
exten => s,3,Ringing
exten => s,4,Wait,4
exten => s,5,Answer
exten => s,6,Playback(invalid)
exten => s,7,Hangup

[incoming-portunity]
;exten => s,1,DIAL(IAX2/idefix)
exten => s,1,NoOp(--- ${CALLERID} calling on portunity over IAX2
(${EXTEN}) ---)
exten => s,2,Set(LANGUAGE()=de)
exten => s,3,Ringing
exten => s,4,Wait,4
exten => s,5,Answer
exten => s,6,Playback(invalid)
exten => s,7,Hangup

But if I get a call it is always matched with the section [guest] and
calls the context default. But if a call is incoming from portunity
should not the section [portunity-out] with context incoming-portunity
be called?

iax2 show registry says:
Host                  Username    Perceived             Refresh  State
82.139.223.1:4569     XXXXXXXX    XX.XX.12.XX:4569         60 Registered

Thx a lot for help!

Best regards,
Matthias