[Asterisk-Users] TE406P - MFC/R2

[Moises Silva]

you can specify the logging level in unicall.conf

logleve=0-255

select a value from 0 to 8. According to unicall.h the levels are:
enum
{
    UC_LOG_ERROR                    = 1,
    UC_LOG_WARNING                  = 2,
    UC_LOG_PROTOCOL_ERROR           = 3,
    UC_LOG_PROTOCOL_WARNING         = 4,
    UC_LOG_FLOW                     = 5,
    UC_LOG_CAS                      = 6,
    UC_LOG_DEBUG_1                  = 7,
    UC_LOG_DEBUG_2                  = 8
};

I would recommend a value of 4

Regards



On 5/26/06, Fernando Lujan <fernando.lujan at mandic.com.br> wrote:
> Fernando Lujan wrote:
> > Steve Underwood wrote:
> >
> >
>
>
> The problem is almost solved. The card was configured as a T1 interface,
> the selled came and jumped it.
>
> Now I have the following problem. When I call from my legacy pbx, appear
> a event:
>
> *CLI> May 26 12:04:09 WARNING[5215]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/31      <- 0001  [1/       1/Idle          /Idle         ]
> May 26 12:04:09 WARNING[5215]: chan_unicall.c:627 unicall_report: MFC/R2
> UniCall/31 Detected
> May 26 12:04:09 WARNING[5215]: chan_unicall.c:627 unicall_report: MFC/R2
> UniCall/31 Making a new call with CRN 32769
> May 26 12:04:09 WARNING[5215]: chan_unicall.c:627 unicall_report: MFC/R2
> UniCall/31 1101  ->      [2/       2/Idle          /Idle         ]
> May 26 12:04:09 WARNING[5215]: chan_unicall.c:2644 handle_uc_event:
> Unicall/31 event Detected
> May 26 12:04:54 WARNING[5215]: chan_unicall.c:627 unicall_report: MFC/R2
> UniCall/31      <- 1001  [2/       2/Seize ack     /Seize ack    ]
>
>
> But this event, doesn't enter in the context which I configure in the
> unicall.conf file. Do I need to change something else?
>
> Thanks again.
>
> Fernando Lujan
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


-- 
"Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"