[Asterisk-Users] Polycom 301's drop last two digits of dialed number

[Anthony Rodgers]

Hi Jamie,

Take a look at the dialstring in your sip.cfg - you'll need to adjust  
this to match your local dialing plan.

Regards,
-- 
Anthony Rodgers
Business Systems Analyst
District of North Vancouver
Web: http://www.dnv.org
RSS Feed: http://www.dnv.org/rss.asp



On 26-May-06, at 2:49 AM, Jamie Heckford wrote:

> Hi All,
>
> Having a rather annoying problem with the Polycom 301 phones,  
> suspect it
> to be my dialplan.
>
> Basically if you lift the receiver off the handset and dial a  
> number, it
> will not let you dial a number longer than 10 digits (Can see this  
> being
> acceptable in US, but in UK its a right pain). As soon as the 10th  
> digit
> is entered, it starts to dial and the number is invalid. If the  
> phone is
> left on hook and the number is dialed, it works fine when pressing the
> 'send' key on the handset as it sends the whole number.
>
> Can anyone shed any light on this issue? I thought it could be  
> asterisk
> is trying to Dial to soon so I added a Wait in the dialplan but it
> didn't seem to work.
>
> Kind regards
>
> Jamie Heckford
> Technical Consultant
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>