[Asterisk-Users] pap2 bridging problems

[William Piper]

Sounds like a NAT issue. 
Make sure that in your sip.conf you have nat=yes.

If that doesn't work, connect to a stun server, or DMZ your ATA, or port
forward all needed ports to the ATA's internal IP.

FYI, on several applications where I set port forwarding... I needed to set
nat=no to get it to work.

bp

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Miles Scruggs
Sent: Thursday, May 25, 2006 11:11 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] pap2 bridging problems

I'm having a real problem with one of my linksys pap2.  On outgoing 
calls the callee will ring, but caller (pap2) will not here it ring  
When the callee answers, no audio is transmitted either way.  Asterisk 
reports the call connected and bridged correctly.

Now the kicker is that sometimes it works and other times it doesn't.  I 
have had the most luck calling land lines, but sometime cell phones will 
work also.

If someone could help me out that would be awesome.

Miles
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


__________ NOD32 1.1559 (20060525) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com