[Asterisk-Users] Spoofing a BLF Signal?

[Matt]

Ok,
Then bristuff may be the way to go.  However, I read this on the wiki
"Note: Using bristuff breaks PRI support, so you cant have both bri
and pri in the same server. "
That's not good!  I need PRI.

Can I load bristuff just like I load zaptel (that being a module,
without patching asterisk)



On 5/24/06, Kevin P. Fleming <kpfleming at digium.com> wrote:
> Matt wrote:
> > My system does not have bristuff installed.   The problem, though,
> > that I see with bristuff is it would turn ALL of my agents ACD lights
> > on when one logged in.   What I really just want to do is turn on a
> > light on a phone when someone dials an extension.   It really is
> > looking like there is no way at all to do this =(
>
> Yes, the bristuff package contains exactly what you would need to do
> this... a virtual 'device' channel driver, and diaplan applications to
> set the state of that device. Combined with a hint to watch that device,
> you can manage the BLF lamps on your phones.
>
> > Clearly I can do something like:
> > 2345,hint,2345 and a show hints shows 2345 as either Idle or
> > Unavailable.  Can I manually change the setting for an extension?
>
> Not at this time, no. The extension state is computed by combining the
> device states of all the devices in the hint, and that's all. The code
> OEJ has been working on will make a virtual device manager available,
> which would work the same way as the bristuff package does it.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>