[Asterisk-Users] TE406P - MFC/R2

[Steve Underwood]

Fernando Lujan wrote:

> Guys,
>
> I'm trying to configure a TE406P with MFC/R2.
>
> here goes my zaptel.conf:
>
> span=1,0,0,ccs,hdb3,crc4
> cas=1-15:1101
> dchan=16
> cas=17-31:1101
>
> span=2,0,0,ccs,hdb3,crc4
> cas=32-46:1101
> dchan=47
> cas=48-62:1101

That config is completely wrong. Try following the config in the MFC/R2 
documentation. And please use the documentation at soft-switch.org. I 
keep getting problems reported by people using some random junk 
documentation they found somewhere else.

>
> The first strange behavior is that the:
>
> zap show status
>
> shows this:
>
> Description                              Alarms     IRQ        
> bpviol     CRC4
> T4XXP (PCI) Card 0 Span 1                OK         0          
> 0          0
> T4XXP (PCI) Card 0 Span 2                OK         0          
> 0          0
> T4XXP (PCI) Card 0 Span 3                OK         0          
> 0          0
> T4XXP (PCI) Card 0 Span 4                UNCONFIGUR 0          
> 0          0
>
> How is it possible? Since i just configure 2 spans!

If you configured chan_zap for 2 spans, this is also wrong. You should 
be configuring chan_unicall for the spans. Again, look at the examples 
in he documentation.

>
> And the second problem is that when I try to place a call I receive this:
>
>    -- AGI Script Executing Application: (Dial) Options: 
> (UniCall/g1/096213788|15|gS(600))
>    -- Setting call duration limit to 600 seconds.
> May 24 15:13:43 NOTICE[5530]: app_dial.c:1029 dial_exec_full: Unable 
> to create channel of type 'UniCall' (cause 0 - Unknown)
>  == Everyone is busy/congested at this time (1:0/0/1)
>
> How can I solve this? Or at least debug what is the problem.

Regards,
Steve