[Asterisk-Users] Problem after upgrade to 1.2.7.1

[andrutto]

Hi

Last friday I have upgraded to Asterisk 1.2.7.1 (bristuff-0.3.0-PRE-1p.tar.gz). Since that I have a problem with my Asterisk box. I am receiving these messages:
May 24 09:30:11 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).
May 24 09:30:12 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).
May 24 09:31:03 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 1).
May 24 09:31:13 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 4, stat = 0xff, card = 2).
May 24 09:31:14 asterisk kernel: zaphfc: empty HDLC frame or bad CRC received (framelen = 6, stat = 0xff, card = 2).
Before the update this problem didn't exist.

My configuration looks like this:

card 0 ISDN NT mode
card 1 ISDN TE mode
card 2 ISDN TE mode
card 3 TDM400P

I haven't got any interrupts issues

           CPU0       CPU1
  0:     336828          0          XT-PIC  timer
  1:          2          0          XT-PIC  keyboard
  2:          0          0          XT-PIC  cascade
  5:   26801377          0          XT-PIC  zaphfc
  7:   26801425          0          XT-PIC  zaphfc
 10:    3350188          0          XT-PIC  wctdm
 11:      18702          0          XT-PIC  eth0
 12:   26801422          0          XT-PIC  zaphfc
 14:       8297          0          XT-PIC  ide0
NMI:          0          0
LOC:     336781     336779
ERR:          2
MIS:          0


I tried to use google but unfortunately I haven't found anything helpful. Does anyone can tell what is wrong? Is it because Asterisk 1.2.7.1 or because the bristuff. Or maybe I did something wrong???

I can make and receiving calls with no problems. But the messages are very annoying.

Please help!!!

Cheers

Andrutto



----------------------------------------------------------------------
Tysiace zdjec swietnych samochodow! >>> http://link.interia.pl/f1944