[Asterisk-Users] CallerID

Greg Oliver goliver at cistera.com
Wed May 24 08:12:18 MST 2006


Yeah - I have tried everything - even turning it off on the other PBX
for the entire system - then XO kindly just put in the last 4 and passes
it on - which would normally be OK, but the other PBX I am calling
accepts that as valid and therefore I still get data..

I am going to have to get XO to turn it off momentarily or ask a bill
collector to call the number for me :)

Thanks,

Greg

On Tue, 2006-05-23 at 12:55 -0400, C F wrote:
> It appears that the PBX sitting between Asterisk and your provider is
> not passing on the calling pres flags.
> 
> On 5/23/06, Lee Archer <lee.archer at pentagon-systems.com> wrote:
> > I have a problem with BT in the UK.  Using setcallerpres I can change
> > the number shown on the recipents phones to Private or unknown but no
> > matter what I set my asterisk cid and callerpres to it still displays
> > the base number of my PRI ddi range.
> >
> > Regards
> >
> > Lee
> >
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of C F
> > Sent: 23 May 2006 15:05
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] CallerID
> >
> > You should set the presentation flags to private.
> > http://www.voip-info.org/wiki/index.php?page=Asterisk+cmd+CallingPres
> >
> > On 5/23/06, Greg Oliver <goliver at cistera.com> wrote:
> > > I am trying to set CIDNum to nothing, but my outgoing PRI controlled
> > > by another PBX seems to fill in something when asterisk does not..  If
> >
> > > I set a number either in the sip channel for the phone, or from
> > > extensions.con, it is realized..  If I try to leave them blank, or
> > > even Not Defined, the main number of the pri gets sent out..
> > >
> > > I am trying to debug a glitvh in or software and I need to be able to
> > > make a test call with unknown (blank callerid)..  I can successfully
> > > set it to private, but that is not the same..
> > >
> > > Any ideas?
> > >
> > > TIA
> > >
> > > -Greg
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > ###########################################
> >
> > This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
> > For more information, connect to http://www.f-secure.com/
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list