[Asterisk-Users] GXP2k and BLF problem

[Gareth Blades]

What firmware version are you running on the phones?

On Wed, 2006-05-24 at 11:56, asterisk wrote:
> It does not happen with a reload of asterisk but when the server is
> rebooted. I have set the register timeout to 1 min but this has no
> effect. The BLF still does not work. The * is V 1.2.7.1. I can see the
> phone register first time when phone reboots and would expect to see
> it re-register every 1 min on the console if I understand things
> correctly, but it does not.
> 
>  
> 
> Fadge
> 
>  
> 
>                                    
> ______________________________________________________________________
> 
> From:asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Lee
> Archer
> Sent: 24 May 2006 11:30
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] GXP2k and BLF problem
> 
> 
>  
> 
> Stopping and restarting Asterisk will lose the hints, then you will
> have to wait until the phone registers again.  With 1.2.7.1 a reload
> shouldn't lose anything.  Change the register time on the phones to
> something less that 60 minutes if it's a big problem.  Instead of
> factory defaulting the phones you might find a simple restart will
> re-register the phone and BLF will work on the phone.
> 
>  
> 
> Regards
> 
>  
> 
> lee
> 
>  
> 
>                                    
> ______________________________________________________________________
> 
> From:asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of picciuX
> Sent: 24 May 2006 10:49
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] GXP2k and BLF problem
> 
> asterisk version? until 1.2.7.1, sip subscriptions get lost on reload
> of asterisk. In this case, have to wait until phone re-registers and
> re-subscribe for BLFs...
> 
> 2006/5/24, asterisk <asterisk at zinix.co.uk>:
> 
> 
> Hi,
> 
> Is anyone else having problems with the Grandstream GXP2000 BLF? When
> I
> restart * the status lights stop working but the buttons still work as
> one
> touch dials and call the correct number. The only way I cen get the
> lights 
> working again is to reset to factory default and re-build the config.
> 
> I am running I upgraded the firmware to 1.1.0.13 but still have the
> same
> problem.
> 
> Any ideas ?
> 
> Fadge
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit: 
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> ###########################################
> 
> This message has been scanned by F-Secure Anti-Virus for Microsoft
> Exchange.
> For more information, connect to http://www.f-secure.com/
> 
> 
> 
> ______________________________________________________________________
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users