[Asterisk-Users] chan_zap.so error, asterisk stopped

[Shenen Shenen]

Hi!I've a problem with asterisk,it doesn't start..it's stopped..I used the
amportal start command and this is the result:

SETTING FILE PERMISSIONS
Permissions OK

STARTING ASTERISK
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.

-----------------------------------------------------
Asterisk could not start!
Use 'tail /var/log/asterisk/full' to find out why.
---------------------------------------------------

if use the tail comand this is the result:

-----------------------------------------------------
Asterisk could not start!
Use 'tail /var/log/asterisk/full' to find out why.
-----------------------------------------------------
[root at asterisk_179 ~]# tail /var/log/asterisk/full
May 23 04:06:36 VERBOSE[4327] logger.c:  [chan_features.so]May 23 04:06:36
VERBO                                              SE[4327] logger.c:
[chan_features.so] => (Feature Proxy Channel)
May 23 04:06:36 VERBOSE[4327] logger.c:   == Registered channel type
'Feature' (                                              Feature Proxy
Channel Driver)
May 23 04:06:36 VERBOSE[4327] logger.c:  [chan_zap.so]May 23 04:06:36
VERBOSE[43                                              27] logger.c:
[chan_zap.so] => (Zapata Telephony w/PRI)
May 23 04:06:36 VERBOSE[4327] logger.c:   == Parsing
'/etc/asterisk/zapata.conf'                                              :
May 23 04:06:36 VERBOSE[4327] logger.c:   == Parsing
'/etc/asterisk/zapata.con                                              f':
Found
May 23 04:06:36 WARNING[4327] config.c: Unknown directive 'switchtype' at
line 9                                               of zapata.conf
May 23 04:06:36 WARNING[4327] config.c: Unknown directive 'overlapdial=yes'
at l                                              ine 22 of zapata.conf
May 23 04:06:36 ERROR[4327] chan_zap.c: Unknown signalling method
'bri_net_ptmp'
May 23 04:06:36 ERROR[4327] chan_zap.c: Signalling must be specified before
any                                               channels are.
May 23 04:06:36 WARNING[4327] loader.c: chan_zap.so: load_module failed,
returni                                              ng -1
May 23 04:06:36 WARNING[4327] loader.c: Loading module chan_zap.so failed!


I've a Digium Wildcard TE110P TE/E1 card 0 and in the /ect/zaptel.conf the
configuration is the following:

# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order


# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0"
# channel 1, WCT1, unhandled for now
# channel 2, WCT1, unhandled for now
# channel 3, WCT1, unhandled for now
# channel 4, WCT1, unhandled for now
# channel 5, WCT1, unhandled for now
# channel 6, WCT1, unhandled for now
# channel 7, WCT1, unhandled for now
# channel 8, WCT1, unhandled for now
# channel 9, WCT1, unhandled for now
# channel 10, WCT1, unhandled for now
# channel 11, WCT1, unhandled for now
# channel 12, WCT1, unhandled for now
# channel 13, WCT1, unhandled for now
# channel 14, WCT1, unhandled for now
# channel 15, WCT1, unhandled for now
# channel 16, WCT1, unhandled for now
# channel 17, WCT1, unhandled for now
# channel 18, WCT1, unhandled for now
# channel 19, WCT1, unhandled for now
# channel 20, WCT1, unhandled for now
# channel 21, WCT1, unhandled for now
# channel 22, WCT1, unhandled for now
# channel 23, WCT1, unhandled for now
# channel 24, WCT1, unhandled for now

# Span 2: ZTDUMMY/1 "ZTDUMMY/1 1"

# Global data

loadzone        = us
defaultzone     = us
~

in /var/aah_load/zaptel.conf I've this:

#
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg

fxsks=1
loadzone = us
defaultzone=us
~
We're is the problem?HELP ME PLEASE!!!
10000000000000 thanks!!!
Ciao


On 5/24/06, Tzafrir Cohen <tzafrir at cohens.org.il> wrote:
>
> On Wed, May 24, 2006 at 08:46:33AM +0200, Shenen Shenen wrote:
> > Hi!I've a problem with asterisk,it doesn't start..it's stopped..I used
> the
> > amportal start command and this is the result:
> >
> > SETTING FILE PERMISSIONS
> > Permissions OK
> >
> > STARTING ASTERISK
> > Asterisk ended with exit status 1
> > Asterisk died with code 1.
> > Automatically restarting Asterisk.
> > Asterisk ended with exit status 1
> > Asterisk died with code 1.
> > Automatically restarting Asterisk.
>
> What's the contents of your zapata.conf ? your /etc/zaptel.conf ?
>
> What zaptel hardware do you have? (e.g: Digium cards)
>
> -- Tzafrir
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/fd25dd79/attachment.htm