[Asterisk-Users] Status: Provisioned, Down, Active - Long

[Tomislav Parčina]

Hi list!

I'm trying to setup Digium TE205P E1 card to work with my provider (and Ericsson BP 250 - this comes later). When I execute "pri show span 1" this is what I get.

pbxzg1*CLI> zap show status

Description Alarms IRQ bpviol CRC4

T2XXP (PCI) Card 0 Span 1 OK 0 0 0

T2XXP (PCI) Card 0 Span 2 UNCONFIGUR 0 0 0

pbxzg1*CLI> pri show span 1

Primary D-channel: 16

Status: Provisioned, Down, Active

Switchtype: EuroISDN

Type: CPE

Window Length: 0/7

Sentrej: 0

SolicitFbit: 0

Retrans: 0

Busy: 0

Overlap Dial: 0

T200 Timer: 1000

T203 Timer: 10000

T305 Timer: 30000

T308 Timer: 4000

T313 Timer: 4000

N200 Counter: 3

Notice "Status: Provisioned, Down, Active". This "Down" is what I'm woried about. I have search list and Internet and explanation I could find is that my D channel is down (for some reason). I have put jumpers for E1 (1-2 and 3-4 are connected). And those are mine extensions, zaptel and zapata conf files.

extensions.conf

include => pomoc

exten => _0.,1,NoOp(${CALLERID(name):0:4})

exten => _0.,n,NoOp(${CALLERID(number)})

exten => _0.,n,GotoIf($["${CALLERID(name):0:4}" = "Lama"]?4:6)

exten => _0.,n,Dial(Zap/g1/${EXTEN:1},60,TW) ; W - calling user to start recording *1

exten => _0.,n,Hangup

exten => _0.,n,Set(CALLERID(name)=Vanjski poziv)

exten => _0.,n,Set(CALLERID(number)=100)

exten => _0.,n,Dial(Zap/g1/${EXTEN:1},60,tw) ; w - caled user to start recording *1

exten => _0.,n,Hangup

zaptel.conf

span=1,1,0,cas,hdb3 # koristiti ovo - da se koristi telco's clock as timing source for the card

bchan = 1-15,17-31

dchan = 16

loadzone = it

defaultzone = it

zapata.conf

[channels]

context=zap-in

switchtype=euroisdn

pridialplan=unknown

prilocaldialplan=unknown

usecallerid=yes

hidecallerid=no

callwaiting=yes

callwaitingcallerid=yes

threewaycalling=yes

transfer=yes

cancallforward=yes

echocancel=yes

rxgain=0.0

txgain=0.0

group=1

callgroup=1

pickupgroup=1

immediate=no

callprogress=no

callerid=asreceived

group=1

signalling=pri_cpe ; pri_cpe - kad se povezujem s provjaderom, pri_net kad sam ja provider (dva asteriska)

channel => 1-15,17-31

When I call out this is what I see on CLI

-- Executing NoOp("SIP/148-74a3", "Lama") in new stack

-- Executing NoOp("SIP/148-74a3", "888") in new stack

-- Executing GotoIf("SIP/148-74a3", "1?4:6") in new stack

-- Goto (sip,00989970434,4)

-- Executing Dial("SIP/148-74a3", "Zap/g1/0989970434|60|TW") in new stack

== Everyone is busy/congested at this time (1:0/1/0)

-- Executing Hangup("SIP/148-74a3", "") in new stack

== Spawn extension (sip, 00989970434, 5) exited non-zero on 'SIP/148-74a3'

I'm working on this for more than 7 hours and I haven't made any progress :((

Thank you for your help.

 

--

Tomislav Parčina

Lama Computers Split

Stinice 12, 21000 Split

Tel.: +385(21)495148

SIP: tomo at pbx.lama.hr

e-mail: tparcina#lama.hr

http://www.lama.hr <http://www.lama.hr/>