[Asterisk-Users] Configuring a TDM400P with one FXS port

[mohamed kerbachi]

Hi,
I have a TDM400P and it works,
Send us the output of your "dmesg" command.

Regards.
--- "M.Hockings" <veeshooter at hockings.net> a écrit :

> In my attempt to setup a single FXS line I have been
> following the 
> instructions for "Telephony Card Drivers" on the
> asteriskdocs.org site.
> I have managed to checkout, make and install the
> zaptel code and can 
> load the zaptel module but when I attempt to load
> the wcfxs module it 
> tells me:
> 
> ZT_CHANCONFIG failed on  channel 1: No such device
> or address (6)
> FATAL: Error running install command for wctdm
> 
> On the card the single FXS module is in the position
> at the back of the 
> TDM400P (i.e., closest to the connectors)
> 
> In the /etc/zaptel.conf file I have put the
> following at the bottom of 
> the file:
> 
> fxoks=1
> loadzone=us
> defaultzone=us
> 
> I have also tried fxoks=4 with the same results
> other than that the 
> channel number changes in the message.
> 
> Any idea what I am configuring incorrectly ?
> 
> Mike
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
> --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 



	

	
		
___________________________________________________________________________ 
Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel. 
Rendez-vous sur http://fr.yahoo.com/set