[Asterisk-Users] Netherlands zaptel.conf

[Pieter Claassen]

Ok, eventually I gave up on the version of asterisk in Ubuntu breezy 
1:1.0.9.dfsg-1 and compiled it from CVS (asterisk, libpri and zaptel driver) 
and all problems went away. It just looks like the code included in Breezy is 
a bit broken.

Thanks for all the help.
Pieter

On Wednesday 17 May 2006 13:24, M.Masri wrote:
> The correct module to load for a TDM Cards interface is wctdm
> see http://www.digium.com/en/docs/misc/quick_install_zaptel_asterisk.pdf
>
>
> Regards,
>
> Moutaz
>
>
> ---------- Original Message -----------
> From: Pieter Claassen <pieter at claassen.co.uk>
> To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-
> users at lists.digium.com>
> Sent: Wed, 17 May 2006 12:17:56 +0200
> Subject: Re: [Asterisk-Users] Netherlands zaptel.conf
>
> > On Wednesday 17 May 2006 08:48, Florian Overkamp wrote:
> > > Michiel van Baak wrote:
> > > > If you load the wcfxs module and everything works (cept for
> > > > the asterisk answering the phoneline) all is correct.
> > > > wcfxs is for connecting an analog phone, not a PSTN
> > > > connection. I think you have the wrong module on you
> > > > wildcard to interface with the PSTN net.
> > > >
> > > > Sorry.
> > >
> > > Whoa, good call! I totally ignored that options.
> > > Pieter, what color is the module ?
> > >
> > > S110M = Green (for a phone device)
> > > X100M = Red (for a phone line)
> >
> > The module is red and plugged into the UPC line (phone line).
> > I also moved the module from the 4th slot on the card to the first
> > slot. I plugged a power source from the motherboard into the card
> > (not sure if it is needed).
> >
> > So, it looks like I have the right module installed.
> >
> > Is the wcfxs the correct module to load for a fxo interface?
> >
> > Any further comments appreciated.
> >
> > Pieter
> >
> > root at backup:~ # lsmod |grep zap
> > zaptel                225284  1 wcfxs
> > crc_ccitt               2176  2 hisax,zaptel
> > root at backup:~ # ztcfg -vv
> >
> > Zaptel Configuration
> > ======================
> >
> > Channel map:
> >
> > Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> >
> > 1 channels configured.
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> ------- End of Original Message -------
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users