[Asterisk-Users] How to unlock old SCCP Cisco 7960 ?

[T.S]

As far as I know, you will still need a tftp or ftp server in order to do
that.

Is this phone setup to configure itself from tftp/ftp server each time the
phone is restarted? Then that would explain why its "stuck" because the
tftp/ftp server is removed.

Usually they are setup to get the config upon initial setup, then you change
it not to look at the tftp/ftp server again.

Well from the last time I played with them.. back in 2001/2003  :-(

 

Terrelle

 

 

  _____  

From: Olivier Krief [mailto:olivier.krief at gmail.com] 
Sent: Saturday, May 20, 2006 12:12 PM
To: xytek at hotmail.com; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] How to unlock old SCCP Cisco 7960 ?

 

It passes Configuring VLAN.
It gets its own and gateway IP addresses from DHCP server but remains stuck
in "Configuring IP"...
No FTP server is defined.

I believe Network Configuration menu is locked because "Configuring IP"
process in going on. 

If I could find a mean to stop this process, maybe I could change its FTP
server setting and force it to upgrade its software.

Maybe I should first upgrade SCCP firmware ...
What do you think ?

2006/5/20, T.S <xytek at hotmail.com>:

I believe it's trying to get an IP. Put it on a network, have a DHCP server
up to give it a possible address, and see if that changes its behavior.

 

Terrelle

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Olivier Krief
Sent: Saturday, May 20, 2006 9:53 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] How to unlock old SCCP Cisco 7960 ?

 

2006/5/20, Cory Andrews <Cory at voipsupply.com >:

Olivier

 

Complete these steps:

1.      Go to the main Date/Time screen.

How do you get to that screen ?
It's crazy but when I plug my phone, the only thing I can see is :
a black strip on top with 2 lines bellow showing : 
Cisco Systems, Inc.
Copyright 2000

and clock-icon with "Configuring VLAN" or "Configuring IP" in screen bottom
left

It seems that the phone is frozen in boot sequence or something similar. 
It's strange because that phone was fully functionnal months ago.
Is it broken now ?
Is there a hardware reset I could to wake it up ?

Status Message shows "DNS Timeout" (I don't have any DNS server configured) 
Network Statistics menu shows "Phone Initialized" (no error mentioned)

and Network Configuration menu is still locked.

1.      Press **# to unlock Network Configuration on the phone.

How do you exactly "Press **#" ? Mine remains locked. 
 

Regards

 


_______________________________________________
--Bandwidth and Colocation provided by Easynews.com -- 

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060520/e9271696/attachment.htm