[Asterisk-Users] X100P not recognised on FreeBSD system

[Chris Hastie]

I've just received an OEM Wildcard X100P FXO card. Installing into my 
FreeBSD 5.4-RELEASE box it doesn't appear to be recognised at all. Since 
it's the first time I've put a PCI card in this machine I've just 
dropped a Netgear ethernet card in to make sure there isn't something 
fundamentally wrong with the motherboard, but that works fine.

Is there anything else I should check / try before assuming the X100P is 
faulty?

Output of pciconf -l -v below (after the Netgear card went back to where 
it belongs):

agp0 at pci0:0:0:  class=0x060000 card=0x31161106 chip=0x31161106 rev=0x00 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT8375 ProSavageDDR PM266/KM266 CPU to PCI Bridge'
     class    = bridge
     subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0911106 rev=0x00 hdr=0x01
     vendor   = 'VIA Technologies Inc'
     device   = 'VT8633 Apollo Pro 266 CPU to AGP Controller'
     class    = bridge
     subclass = PCI-PCI
uhci0 at pci0:16:0:        class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x80 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
uhci1 at pci0:16:1:        class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x80 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
uhci2 at pci0:16:2:        class=0x0c0300 card=0x30381106 chip=0x30381106 rev=0x80 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)'
     class    = serial bus
     subclass = USB
none0 at pci0:16:3:        class=0x0c0320 card=0x73801462 chip=0x31041106 rev=0x82 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT6202 USB 2.0 Enhanced Host Controller'
     class    = serial bus
     subclass = USB
isab0 at pci0:17:0:        class=0x060100 card=0x31771106 chip=0x31771106 rev=0x00 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT8235 PCI to ISA Bridge'
     class    = bridge
     subclass = PCI-ISA
atapci0 at pci0:17:1:      class=0x01018a card=0x73801462 chip=0x05711106 rev=0x06 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
     class    = mass storage
     subclass = ATA
none1 at pci0:17:5:        class=0x040100 card=0x73801462 chip=0x30591106 rev=0x50 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
     class    = multimedia
     subclass = audio
vr0 at pci0:18:0:  class=0x020000 card=0x738c1462 chip=0x30651106 rev=0x74 hdr=0x00
     vendor   = 'VIA Technologies Inc'
     device   = 'VT6102 Rhine II PCI Fast Ethernet Controller'
     class    = network
     subclass = ethernet
none2 at pci1:0:0: class=0x030000 card=0x73891462 chip=0x8d045333 rev=0x00 hdr=0x00
     vendor   = 'S3 Graphics Co., Ltd.'
     device   = '86C420 ProSavage DDR'
     class    = display
     subclass = VGA

-- 
Chris Hastie