[Asterisk-Users] Re: DISA & SPA3000 issues

[Jonathan Attwood]

INFO is the way to go for DTMF at least on the PSTN tab of your SPA3K

I have dtmfmode=auto in sip.conf & I use DISA daily

On 5/17/06, Philippe Lindheimer <p_lindheimer at yahoo.com> wrote:
>
> Just tried it on mine, worked fine:
>
> Cellphone Call -> POTS -> SPA3000 -> Asterisk -> DISA -> Telasip
>
> As an FYI, I have my SPA3000 setup with INFO for the DTMF. When I originally
> installed it, I couldn't get the DTMF digits to work coming in using AUTO,
> which is why I have it using INFO (needs to be set on both the SPA and in
> Asterisk).
>
> I'm running the SPA300 with Software Version: 2.0.13(GWg), Hardware Version
> 2.0.1(4e16).
>
> philippe
>
>
>
> >
> > From: Dave Hawkes <daveh at cadlink.com>
> > To: asterisk-users at lists.digium.com
> > Date: Wed, 17 May 2006 13:44:43 -0400
> > Subject: [Asterisk-Users] Re: DISA & SPA3000 issues
>
>
> I have this exact same issue with the SPA3000, I'm assuming it must be a
> SPA3000 bug?
>
> Dave Hawkes
>
> Alchaemist wrote:
> > Hi,
> >
> > These days I run into something quite odd.
> > I have an A at H that was modified to meet our requirements.
> > We have a completely funtional DISA which we use pretty much all the
> > time.
> > I works flawlessly with incomming SIP calls from several providers,
> > IAX calls from FWD and with ZAP.
> >
> > Recently we came out with a situation where it doesn't work... with
> > a SPA3000 PSTN Line.
> > You can call, navigate de IVR, log in into our app, and then when
> > you go to DISA, and DISA plays the dialtone... whatever you dial is not
> > recognized...
> >
> > This was REALLY odd... so I made a network capture with Ethereal,
> > and... the SPA actually STOPS sending the RTP Events after the second
> > dialtone...
> >
> > To verify this, I created an IVR which played the dialtone, and
> > verified that it was true.... no RTP DTMF events (RFC2833) are sent after
> > the SPA listens the second dialtone.
> >
> > I just reviewed the 87 pages PDF of the SPA3000... and didn't find
> > anything about such "feature".
> > Now I am going to try to figure out if it has something to do with
> > the tones recognition of the SPA.
> > I the meanwhile I had to write a little DISA-like app, based on
> > something I found on this forum, without the dialtone.
> >
> > Did anyone find out anything about this issue before?
> >
> > REGARDS!!!
> > Alchaemist
> >
> >
> >
> >
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
>