[Asterisk-Users] Netherlands zaptel.conf

[Pieter Claassen]

> Hmm, shouldn't you be loading wcfxo ? The configs look sane enough, most
> things matching with an old X100P setup we have laying around. Most of
> my work is on BRI/PRI systems though :-)
>
I thought the wcfxs module is used for fxo cards? Anyhow, if I load the
wcfxo module, then I get errors with ztcfg (below).

ZT_CHANCONFIG failed on channel 1: No such device or address (6)

Normally, if I load the wcfxs module and the zaptel module, then this is
what I get (listed below). It all looks reasonable and the only issue
seems to be that the card doens't answer the line.

What does the zttool loopback test do? Is there a way to test the card?

Thanks,
Pieter

root at backup:~# ztcfg -vvvvvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels configured.

root at backup:~# cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"

           1 WCTDM/0/0 FXSKS
           2 WCTDM/0/1
           3 WCTDM/0/2
           4 WCTDM/0/3