[Asterisk-Users] chan_capi-cm and dialing without number

[Armin Schindler]

On Tue, 16 May 2006, Klaus Darilion wrote:
> Hi!
> 
> Is it possible to bridge a call (incoming call leg is from the PBX, outgoing
> call leg is to the PSTN) without even dialing a number. Thus, the dial tone
> received from the PSTN should be forwarded to the PBX, and the overlap digits
> received from the PBX should be forwarded to the PSTN.

Yes, this is possible. I use that all the time.
 
> I tried the following, but it does not work. Is there a workaround?
> 
> [frompbx]
> exten => s,1,Dial(CAPI/g1//b,90)

That is correct. I use options /bo , but that should not make any difference 
in that case. At least that example must provide a dialtone to you and the 
possibility to dial your digits.

What exactly does not work?

Armin