Asttapi for Asterisk 1.2 Testers Needed (was RE: [Asterisk-Users]Asterisk TAPI - Outlook click2dial)

Tue May 16 12:17:20 MST 2006

Please hook me up. I have customers dieing for something that works. All our
systems are Asterisk 1.2.7.1
-Kerry
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Clint Sharp
> Sent: Tuesday, May 16, 2006 11:58 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Asttapi for Asterisk 1.2 Testers Needed (was RE: 
> [Asterisk-Users]Asterisk TAPI - Outlook click2dial)
> 
> I've finished a patched version of asttapi that will work 
> with asterisk 1.2.  There were fundamental changes to the 
> Asterisk Management interface between 1.0 and 1.2 that broke 
> asttapi.  I think my patched version will work on 1.0 and 1.2 
> branches, but I have no way of testing since I don't have a 
> 1.0 install nor do I want one :).
> 
> I'm looking for testers, if anyone's willing to test this 
> out, I'll send you a zipped copy of the TSP file (I haven't 
> worked on doing an installer yet).  I need to send out the 
> debug build so I can generate information in case it doesn't 
> work on anyone else's PC.  Contact me off-list for copies.
> 
> Clint
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Tomislav Vojvodic
> Sent: Friday, May 12, 2006 1:39 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Asterisk TAPI - Outlook click2dial
> 
> Oh.. :/ too bad.. 
> 
> I'll have to look at the source.. 
> 
> bye,
> 
> 
> Tomislav
> 
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of T. Shaw
> Sent: Thursday, May 11, 2006 11:20 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Asterisk TAPI - Outlook click2dial
> 
>  Yes, I have the exact same problem.
> :(
> 
> 
> -----Original Message-----
> From: Tomislav Vojvodic [mailto:tomislav at vox-mundi.net]
> Sent: Thursday, May 11, 2006 5:48 AM
> To: xytek at hotmail.com; 'Asterisk Users Mailing List - 
> Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Asterisk TAPI - Outlook click2dial
> 
> Hey, thanks for your reply.. ;)
> 
> I'm also using asttapi from website you posted -> omniis.com. 
> 
> Version is 0.10 (newest)
> 
> Well yeah.. the problem is that hangup doesen't work. Maybe 'hangup'
> isn't
> even implemented in AstTAPI driver so that could be the reason why
> Outlook+AstTapi doesen't know what 'Hangup' from Outlook is. 
> 
> When I clik 'Hangup' in Outlook there is nothing in Asterisk 
> debug/cli window.
> 
> Only problem is that Outlook still thinks that call is active 
> even if you hangup the phone manually.. I mean, when I put 
> the earphone back to base/station/phone.. whatever. Dialing 
> works just fine.
> 
> Because of that you need to close that window 2 or 3 times if 
> you want to call same person/contact again.
> 
> Bye,
> 
> Tomislav
> 
> 
> 
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of T.S
> Sent: Thursday, May 11, 2006 1:08 AM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] Asterisk TAPI - Outlook click2dial
> 
> I had similar problems when I first started to play with it. 
> I've gotten Omniis TSP for Astrisk to work just fine. 
> http://www.omniis.com/asttapi But i don't know the version im 
> using 0.0.8
> 
> Terrelle
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Tomislav Vojvodic
> Sent: Wednesday, May 10, 2006 2:23 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: [Asterisk-Users] Asterisk TAPI - Outlook click2dial
> 
> Hello,
> 
> I'm experiencing some problems with AstTAPI driver. Dialing 
> works just fine, but 'Hangup' from Outlook doesen't.. 
> actually that's not the problem as fact that Outlook doesen't 
> detect end of conversation -> once the call is terminated 
> 'manually' via the phone Outlook still 'thinks' that call is active.
> 
> Anyone knows what's the problem? Is 'hangup' implemented in 
> AstTAPI driver?
> 
> Thanks,
> 
> Tomislav
> 
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> __________ NOD32 1.1530 (20060510) Information __________
> 
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> __________ NOD32 1.1532 (20060511) Information __________
> 
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>