[Asterisk-Users] number that starts with star on PAP2

[Warren Burstein]

Yes, the dialplan field in the PAP (not asterisk's dialplan) was the 
problem.  The dialplan used to have *xx in it (as well as lots of other 
stuff which we left alone), we changed that to *xxx (leaving the double 
*'s in all of the vertical service activation codes) and it now works.

thanks

Philippe Lindheimer wrote:
> You need to modify the dialplan within the PAP2 unit to allow that as 
> a valid number or it won't pass it on. Take a look at the following, 
> it is not specifically for the PAP2 but all the dialplan information 
> should apply:
>  
> http://www.sipura.com/Documents/SipuraSPAUserGuidev2.0.9.pdf
>
>     From: "Time Bandit" <timebandit001 at gmail.com>
>     To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>     <asterisk-users at lists.digium.com>
>     Date: Fri, 5 May 2006 09:48:41 -0400
>     Subject: Re: [Asterisk-Users] number that starts with star on PAP2
>
>     > > Why I did to mine is modify all the internal "Vertical Service
>     > > Activation Codes" to be "**x" instead of "*x". There is probably a
>     > > better way, but this worked for me.
>     >
>     > We tried that, but users report they are still having the same
>     problem
>     > (the site is located in a different country so I can't check
>     myself).
>     Sorry, I don't have my PAP2 under hand, but this is all I did, changed
>     every *xx to **xx and it worked.
>
>     Something that may help you is
>     http://www.netphonedirectory.com/pap2_dialplan.htm
>
>     >
>     > Philippe Lindheimer wrote:
>     > > Yes - that's your problem. You need to porgram the dialpan in
>     the PAP2
>     > > appropriately, disable functions you don't want, etc.
>     > >
>     > We were trying to dial *100, and there wasn't anything in either
>     of the
>     > Codes section that started with *1. Do we have to disable every
>     > function that starts with a star to get anything to work? Also, is a
>     > function disabled by clearing it?
>
>     I didn't try that so I don't know. Just make sure that you changed
>     every single "Vertical Service Activation Codes" to a double *. If you
>     still can't fix it, let me know and I will get back my PAP2 and try to
>     help you
>