[Asterisk-Users] Eicon Diva - problems building new v3 melware driver

Tue May 16 04:54:31 MST 2006

This is some bad behaviour of the Config wizard.

You should then start with

sh# /usr/lib/divas/divas_stop.rc

to clean all of it. And then really start the
divas:

sh# /usr/lib/divas/divas_cfg.rc

Armin

On Tue, 16 May 2006, Klaus Darilion wrote:

> Hi Armin!
> 
> After make install I'm able to run the config script. I configured all 4 ports
> of the card and saved the configuration.
> 
> After that:
> ...
> Load Diva XDI  driver ... OK
> Check for saved MAINT debug/trace buffer ... idle
> Write Diva configuration to CFGLib ... succeeded
> Check Diva configuration ... succeeded, adapter not loaded
> 
> Here, "adapter not loaded" frightens me.
> 
> Nevertheless I tried to activate the config:
> # /usr/lib/divas/divas_cfg.rc
> Update CFGLib information ... failed
> 
> -------------------------------------------------------------------------------
> DIVA CONFIGURATION: CFGLib DRIVER LOAD FAILED
> PLEASE CHECK SYSTEM INSTALLATION
> (kernel version, missing files)
> 
> -------------------------------------------------------------------------------
> DIVAS4LINUX SHUTDOWN OK.
> 
> regards
> klaus
> 
> Armin Schindler wrote:
> > Hi Klaus,
> > 
> > what happens when you try to load the DIDD module
> >  sh# insmod /usr/lib/divas/divadidd.o
> > and what is the kernel (syslog) saying?
> > 
> > Armin
> > 
> > On Tue, 16 May 2006, Klaus Darilion wrote:
> > > Hi Armin!
> > > 
> > > With the new v3 package compilation works fine. But I still have
> > > problems when
> > > starting the config script:
> > > 
> > > 'DIDD' driver load failed. Please check system installation
> > > (kernel version, missing files)
> > > 
> > > Do I have to load any modules before? The Eicon Card is found by
> > > lspci:
> > > 0000:0a:03.0 Network controller: Eicon Networks Corporation Diva
> > > Server
> > > 4BRI-8M Rev 2 (rev 01)
> > > Subsystem: Eicon Networks Corporation Diva Server 4BRI-8M Rev 2
> > > Flags: bus master, medium devsel, latency 32, IRQ 77
> > > Memory at fdeffc00 (32-bit, non-prefetchable) [size=256]
> > > I/O ports at cc00 [size=256]
> > > Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
> > > Memory at fdee0000 (32-bit, non-prefetchable) [size=64K]
> > > Capabilities: [40] Power Management version 1
> > > Capabilities: [48] #06 [0080]
> > > Capabilities: [4c] Vital Product Data
> > > 
> > > 
> > > regards
> > > klaus
> > > 
> > > Armin Schindler wrote:
> > > > On Tue, 16 May 2006, Klaus Darilion wrote:
> > > > > Tzafrir Cohen wrote:
> > > > > > On Tue, May 16, 2006 at 11:05:01AM +0200, Klaus Darilion
> > > > > > wrote:
> > > > > > > Armin Schindler wrote:
> > > > > > > > On Tue, 16 May 2006, Klaus Darilion wrote:
> > > > > > > > > Hi Armin!
> > > > > > > > > 
> > > > > > > > > I now tried 2 versions:
> > > > > > > > > A) I also executed "make prepare" in the
> > > > > > > > > kernel
> > > > > > > > > sources
> > > > > > > > > before building with
> > > > > > > > > "make KDIR=/usr/src/kernel-source-2.6.8"
> > > > > > > > > 
> > > > > > > > > B) I compiled with the kernel headers:
> > > > > > > > > "make KDIR=/lib/modules/2.6.8-2-386/build/"
> > > > > > > > > 
> > > > > > > > > Both times I got the same error message (see
> > > > > > > > > below).
> > > > > > > > > It would
> > > > > > > > > be great if you
> > > > > > > > > can take a look at it because this Asterisk
> > > > > > > > > server
> > > > > > > > > should go
> > > > > > > > > in production
> > > > > > > > > today.
> > > > > > > > What kernel is that? When I use the plain kernel
> > > > > > > > 2.6.8
> > > > > > > > from
> > > > > > > > kernel.org I don't even get any warning.
> > > > > > > > Either the kernel headers are incomplete or this
> > > > > > > > distribution
> > > > > > > > kernel is incompatible in some way. Can you
> > > > > > > > provide a tgz
> > > > > > > > of
> > > > > > > > these sources(headers) directory to me?
> > > > > > > I think I found the problem:
> > > > > > > 
> > > > > > > "make KDIR=/lib/modules/2.6.8-2-386/build/" fails as
> > > > > > > /lib/modules/2.6.8-2-386/build/ links to
> > > > > > > /usr/src/kernel-headers-2.6.8-2-386
> > > > > > > 
> > > > > > > Wheres when setting KDIR to
> > > > > > > /usr/src/kernel-headers-2.6.8-2
> > > > > > > (note:
> > > > > > > note adding the -386) then the compilation works
> > > > > > > fine.
> > > > > > > 
> > > > > > > Maybe we need a Debian expert: What is the difference
> > > > > > > between
> > > > > > > kernel-headers-2.6.8-2 and kernel-headers-2.6.8-2-386
> > > > > > > ???
> > > > > > > 
> > > > > > > Does the compiled 2.6.8-2 works with my 2.6.8-2-386
> > > > > > > kernel?
> > > > > > kernel-headers-2.6.8-2 is a large
> > > > > > architecture-independent
> > > > > > package that
> > > > > > contains most of what is needed from the kernel source to
> > > > > > build
> > > > > > external
> > > > > > modules and such.
> > > > > > 
> > > > > > 2.6.8-2-386 , -686, -686-smp, and all others contain the
> > > > > > little
> > > > > > configuration-specific files .
> > > > > > /usr/src/kernel-headers-2.6.8-2-386 has
> > > > > > many symlinks to files under
> > > > > > /usr/src/kernel-headers-2.6.8-2 .
> > > > > > /usr/src/kernel-headers-2.6.8-2 in itself does not
> > > > > > contain a
> > > > > > "configured
> > > > > > source" or even a .config file.
> > > > > It does:
> > > > > ll /usr/src/kernel-headers-2.6.8-2/.config
> > > > > -rw-r--r--  1 root root 27535 2005-08-16 17:12
> > > > > /usr/src/kernel-headers-2.6.8-2/.config
> > > > > 
> > > > > The question is: can it be used to build modules for
> > > > > 2.6.8-2-386 ?
> > > > I don't think so. It contains a different .config, which might
> > > > not be
> > > > compatible with the running kernel.
> > > > 
> > > > I have made a few fixes to build with the debian header packages.
> > > > The new
> > > > package (3.0.f) will be available for download in about 30
> > > > Minutes.
> > > > 
> > > > I have tested build with
> > > > make KDIR=/usr/src/kernel-headers-2.4.27-2-386
> > > > and
> > > > make KDIR=/usr/src/kernel-headers-2.6.8-2-386
> > > > 
> > > > 
> > > > Armin
> > > > _______________________________________________
> > > > --Bandwidth and Colocation provided by Easynews.com --
> > > > 
> > > > Asterisk-Users mailing list
> > > > To UNSUBSCRIBE or update options visit:
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > > 
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > 
> > > 
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> > 
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 