[Asterisk-Users] Outgoing Calls Not Working all the time

[Michael Welter]

Some central offices cannot immediately accept digits.  Try preceding 
your dial string with a 'w'.


Andrew Berman wrote:
> I currently have Asterisk 1.2.7.1 <http://1.2.7.1> and the Sangoma A200 
> w/ 6 FXO ports and HW Echo canceller.  I have outgoing calling setup to 
> use a group so that if one channel is busy it goes to one of the other 
> channels.  What's weird is that when I dial an outside number, sometimes 
> it goes through and other times I get "You have reached an invalid pager 
> number MCLL327."  I have no idea what that means.  Is Asterisk calling 
> the wrong number sometimes, or is there something wrong with the phone 
> line?  Is there any sort of Asterisk config I can use to avoid this issue?
> 
> Thanks for any help you can provide,
> 
> Andrew
> 
> 
> zaptel.conf:
> 
> loadzone = us
> defaultzone = us
> fxsks = 1-6
> 
> zapata.conf:
> 
> [trunkgroups]
> 
> [channels]
> echocancel = yes
> echocancelwhenbridged = yes
> rxgain = 0.0
> txgain = 0.0
> useincomingcalleridonzaptransfer = yes
> callreturn = yes
> callwaiting = yes
> threewaycalling = yes
> cancallforward = yes
> busydetect = yes
> busycount = 6
> musiconhold = default
> callgroup=1
> pickupgroup=1
> signalling=fxs_ks
> 
> context=incoming1
> group = 1
> channel => 1,3-6
> 
> context=incoming2
> group = 2
> channel => 2
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Michael Welter
Telecom Matters Corp.
Denver, Colorado US
+1.303.414.4980
mike at TelecomMatters.net
www.TelecomMatters.net