[Asterisk-Users] H323 calls will not stay connected
Daren J. Howell DTCommunication
dhowell at dtcommunication.com
Wed May 10 04:44:34 MST 2006
I have restricted the asterisk server to G711 to match the choice on the
PBX, and still same result.
I have read that either endpoint have to be either a master or slave to
communicate to each other. I see in the logs that both are shown to be a
slave. The pbx side has to be set to slave. How can I lock the asterisk side
to be a master? Or is this something to worry about?
_____________________________________
Richard wrote:
Try restricting both ends to one codec;
disallow=all
allow=codec of choice
at the asterisk end and whatever you need to do at the legacy end.
Regards,
Richard
Daren J. Howell
dhowell at dtcommunication.com <mailto:dhowell at dtcommunication.com>
www.dtcommunication.com
PH 678.388.9163
FX 678.921.2133
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060510/53e338f6/attachment.htm
More information about the asterisk-users
mailing list