[Asterisk-Users] SPA-941/942 Bulk provisioning

[Julian J. M.]

Hi,

You can have a look here http://blog.julianmenendez.es/sipura
It's drupal based provisioning system for linksys and sipura phones.
You'll need to register an account to use it.

Basically, you have profiles (linksys na-pap2, sipura spa-3000, etc).
You choose one to create a base "configuration". After that, you
create one or more "devices" based on that configuration, which
inherit its settings. A device is identified by its mac address.

For real 0-config provisioning, one would just need a dhcp server, and
a tft server with an init.cfg file like this:

<flat-profile>
 <Profile_Rule ua="na">
  http://blog.julianmenendez.es/sipura/device/xml/$MA
 </Profile_Rule>

 <Resync_Periodic ua="na">30</Resync_Periodic>
 <Resync_Error_Retry_Delay ua="na">30</Resync_Error_Retry_Delay>
 <Resync_Fails_On_FNF ua="na">Yes</Resync_Fails_On_FNF>
</flat-profile>


Julian.


On 5/3/06, Ed <spied at yandex.ru> wrote:
> asterisk at anime.net wrote:
>
> > I'm in the process of writing an autoprovisioner which can handle
> > fresh out-of-the-box linksys, snom, and grandstream with 0-config
> > (other than entering the mac into a textfile). You never have to touch
> > the phone. Just plug it in.
>
>
> any result?
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>