[Asterisk-Users] some EICON Diva 4BRI questions

[Klaus Darilion]

Hi David!

Thanks for the link.

Interesting - it suggests to terminate the bus only on the receiving 
side - things getting complicated :-)

regards
klaus

David Waugh wrote:
> Hi Klaus,
> 
> Please see the following document.
> [Diva Server Adapter Installation Guide]
> http://www.eicon.com/pubs/20319511.pdf
> Page 24 (back-to-back cable pin layout for BRI interface)
> 
> David
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Klaus
> Darilion
> Sent: 28 April 2006 08:49
> To: Armin Schindler
> Cc: developers at melware.de; Asterisk Users Mailing List - Non-Commercial
> Discussion
> Subject: Re: [Asterisk-Users] some EICON Diva 4BRI questions
> 
> Back to ISDN BRI crossover cable. After reading some ISDN specs I came 
> to the conclusion a crossover cable should be:
> 3---4
> 4---3
> 5---6
> 6---5
> 
> But I also found other pin layouts (e.g. 
> http://www.cisco.com/warp/public/788/signalling/bri_voice_port_cfg.html)
> 
> Armin, how do you construct your BRI crossover cables?
> 
> thanks
> Klaus
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users