[Asterisk-Users] Need help configuring TE100P and 3 X100P clonewith MD3200 chipset

[Wai Wu]

Hmm, I don't have /etc/modprobe.conf, and wctdm is giving me problems.

Which device is it talking about?

[root at asterix /]# modprobe wctdm
/lib/modules/2.4.20-8/misc/wctdm.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-8/misc/wctdm.o: insmod
/lib/modules/2.4.20-8/misc/wctdm.o failed
/lib/modules/2.4.20-8/misc/wctdm.o: insmod wctdm failed 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
steve at daviesfam.org
Sent: Tuesday, May 02, 2006 10:54 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Need help configuring TE100P and 3 X100P
clonewith MD3200 chipset



On Tue, 2 May 2006, Wai Wu wrote:

> [root at asterix root]# modprobe zaptel
> [root at asterix root]# modprobe  wcte11xp ZT_CHANCONFIG failed on 
> channel 25: No such device or address (6)
> /lib/modules/2.4.20-8/misc/wcte11xp.o: post-install wcte11xp failed
> /lib/modules/2.4.20-8/misc/wcte11xp.o: insmod wcte11xp failed 
> [root at asterix root]# modprobe wcfxo ZT_CHANCONFIG failed on channel 
> 25: Invalid argument (22) Did you forget that FXS interfaces are 
> configured with FXO signalling and that FXO interfaces use FXS 
> signalling?
> /lib/modules/2.4.20-8/misc/wcfxo.o: post-install wcfxo failed
> /lib/modules/2.4.20-8/misc/wcfxo.o: insmod wcfxo failed [root at asterix 
> root]#
> 
> What's wrong with configuration?


What's wrong is that configuration in your /etc/modprobe.conf is
automatically running ztcfg when you load wcte11xp.  The ztcfg fails
because it is expecting all the card drivers to be loaded.

So remove all the "install" lines from your /etc/modprobe.conf, then run
ztcfg -vv manually once you have loaded all the drivers.

Or, just ignore the error on loading wcte11xp and plow on loading wctdm.

At that point the ztcfg should succeed.

Steve

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users