[Asterisk-Users] Problems with zaptel and TE210P

[Alexander Lopez]

Did your Telco tell you what switch they are using?

 

Also change your timing settings in the /etc/zaptel.conf file to have
this PRI do primary timing.

 

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dan
Brummer
Sent: Monday, May 01, 2006 2:59 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Problems with zaptel and TE210P

 

Thank you for the reply Alexandar.

 

After I restarted my dev machine I recieved these messages from
asterisk:

 

chan_zap.c:2290 pri_find_dchan: No D-channels available!  Using Primary
channel 24 as D-channel anyway!

chan_zap.c:8202 pri_dchannel: PRI got event: No more alarm (5) on
Primary D-channel of span 1

May  1 10:23:27 WARNING[3882]: chan_zap.c:2290 pri_find_dchan: No
D-channels available!  Using Primary channel 24 as D-channel anyway!

 

So you are right on the D-Chan.  If my telco says everything is ok, what
should I look at next?

 

AFAIK this PRI was in working condition before I moved it to the
asterisk test machine.

 

Thanks!

 

-Dan

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Alexander
Lopez
Sent: Monday, May 01, 2006 11:53 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Problems with zaptel and TE210P

Looks like your D-channel is down.

 

Ztcfg reports all is ok, b/c as far as iut is concerned, it is talking
to your card just fine. LibPri handles the PRI implemetaton.

 

Since you are able to see the pri commands from the CLI, Isdn supprt is
linked into your asterisk core.

 

Call your telco and ask if they have your D-channel in a loop.

 

 

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dan
Brummer
Sent: Monday, May 01, 2006 2:48 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Problems with zaptel and TE210P

 

Some more info to my problem:

 

ipt-dev01*CLI> zap show status

Description                              Alarms     IRQ        bpviol
CRC4

T2XXP (PCI) Card 0 Span 1                OK         0          0
0

 

ipt-dev01*CLI> pri show span 1

Primary D-channel: 24

Status: Provisioned, Down, Active

Switchtype: National ISDN

Type: CPE

Window Length: 0/7

Sentrej: 0

SolicitFbit: 0

Retrans: 0

Busy: 0

Overlap Dial: 0

T200 Timer: 1000

T203 Timer: 10000

T305 Timer: 30000

T308 Timer: 4000

T313 Timer: 4000

N200 Counter: 3

 

Any ideas? ZTCFG looks good.

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dan
Brummer
Sent: Monday, May 01, 2006 10:41 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Problems with zaptel and TE210P

Hello,

I'm just starting out with asterisk and I'm playing around with the
system.  Currently I have a Digium TE210P connected to a PRI on the
Asterisk server.  I have a SIP soft phone on my laptop for testing that
is working fine.  When I try to place a call from my soft phone I get
this from Asterisk:

 

May  1 09:11:41 NOTICE[20098]: app_dial.c:1029 dial_exec_full: Unable to
create channel of type 'Zap' (cause 34 - Circuit/channel congestion)

  == Everyone is busy/congested at this time (1:0/1/0)

  == Auto fallthrough, channel 'SIP/test-3a26' status is 'CONGESTION'

 

 

#/etc/zaptel.conf:

span=1,0,0,esf,b8zs

bchan=1-23

dchan=24

 

#/etc/asterisk/zapata.conf:

[channels]

switchtype=national

context=default

signalling=pri_cpe

group=1

channel => 1-23

 

#/etc/asterisk/extensions.conf:

[general]

static=yes

writeprotect=no

autofallthrough=yes

 

[default]

exten => 123,1,Answer()

exten => 123,2,Playback(hello-world)

exten => 123,3,Hangup()

 

exten => _9NXXXXXX,1,Dial(Zap/g1)

 

 

Any ideas?  Thank you in advance, your help is greatly appreciated.

 

-Dan

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060501/b1cb6032/attachment.htm