[Asterisk-Users] misdn timeout?

[Benoit Panizzon]

Hi all

I have a very strange problem here...
I use a hfc-s card with mISDN in NT mode with an ISDN Phone connected.

When I make a call, the phone rings two or three times and then misdn runs 
into a timeout...
I don't know where to set that timeout, but it's way to short for the called 
to pick up the phone.

If the destination phone is picked up, then everything is allright and the 
connection stays open for as long as none of the phones get hung up...

P[ 1] I IND :SETUP oad:010618115711 dad:
P[ 1]  --> mode:NT cause:16 ocause:16 rad:
P[ 1]  --> info_dad: onumplan:2 dnumplan:  rnumplan:
P[ 1]  --> channel:0 caps:Speech pi:0 keypad:
P[ 1]  --> Bearer: Speech
P[ 1]  --> Codec: Alaw
P[ 0]  --> * NEW CHANNEL dad: oad:010618115711
P[ 1] read_config: Getting Config
P[ 1] config_jb: Called
P[ 1]  --> * CallGrp: PickupGrp:
P[ 1] I SEND:SETUP_ACKNOWLEDGE oad:0010618115711 dad:
P[ 1]  --> mode:NT cause:16 ocause:16 rad:
P[ 1]  --> info_dad: onumplan:2 dnumplan:  rnumplan:
P[ 1]  --> channel:0 caps:Speech pi:0 keypad:
P[ 1]  --> TRANSPARENT Mode
P[ 1] Tone Indicate:
P[ 1]  --> Dial
P[ 1] misdn_write: * prods us
P[ 1] BCHAN: MGR_SETSTACK|IND
P[ 1] I IND :INFORMATION oad:0010618115711 dad:
P[ 1]  --> mode:NT cause:16 ocause:16 rad:
P[ 1]  --> info_dad:4680041618269314 onumplan:2 dnumplan:  rnumplan:
P[ 1]  --> channel:1 caps:Speech pi:0 keypad:
P[ 1] Tone Indicate:
P[ 1]  --> None
P[ 1] Tone Indicate:
P[ 1]  --> None

# Then the call get's passed to my SIP provider...
# It rings three times... (about 10 sec)

P[ 1] * IND : Indication [14] from 0041618269314
P[ 1]  --> * IND :      progress pid:16
P[ 1] I SEND:PROGRESS oad:0010618115711 dad:4680041618269314
P[ 1]  --> mode:NT cause:16 ocause:16 rad:
P[ 1]  --> info_dad:4680041618269314 onumplan:2 dnumplan:  rnumplan:
P[ 1]  --> channel:1 caps:Speech pi:0 keypad:
P[ 1] I IND :TIMEOUT oad:0010618115711 dad:4680041618269314

# Sudden Timeout?!?

P[ 1]  --> mode:NT cause:16 ocause:16 rad:
P[ 1]  --> info_dad:4680041618269314 onumplan:2 dnumplan:  rnumplan:
P[ 1]  --> channel:1 caps:Speech pi:0 keypad:
P[ 1] I SEND:RELEASE_COMPLETE oad:0010618115711 dad:4680041618269314
P[ 1]  --> mode:NT cause:16 ocause:16 rad:
P[ 1]  --> info_dad:4680041618269314 onumplan:2 dnumplan:  rnumplan:
P[ 1]  --> channel:1 caps:Speech pi:0 keypad:
P[ 1] I IND :CLEAN_UP oad: dad:
P[ 1]  --> mode:NT cause:16 ocause:16 rad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0
P[ 1]  --> channel:0 caps:Speech pi:0 keypad:
P[ 1] Trying to Release bc with l3id: 7b0040
P[ 1] * RELEASING CHANNEL pid:0 ctx:to-internetcalls dad:0041618269314 
oad:0010618115711 state: DIALING
P[ 1] * --> In State Dialin
P[ 1] * --> Queue Hangup
P[ 1] BCHAN: MGR_DELLAYER|CNF


Btw, where do those odd '01' and '001' on front of the number come from? mISDN 
Bug? Hardcoded USA (001) International access code?

-Benoit-
-- 
Benoît Panizzon, <bp at imp.ch>
------------------------------------------------------------------------
ImproWare AG, UNIXSP & ISP                     Phone: +41 61 826 93 00
Zurlindenstrasse 29                            Fax:   +41 61 826 93 01
CH-4133 Pratteln                               Net:   http://www.imp.ch/
------------------------------------------------------------------------