[Asterisk-Users] Cisco 7970
Agur Koort
akoort at gmail.com
Tue Mar 28 11:42:42 MST 2006
Hello, can I use same settings and config files with Cisco IP Phone 7910 ?
:)
On 3/24/06, jason justman <jason at jasonjustman.com> wrote:
>
> Best bet is to get "Asterisk Chan_Sccp" http://chan-sccp.berlios.de/
>
> 1.) setup your /etc/asterisk/sccp.conf with something like:
>
> [devices]
>
> type = 7970 ; device type (see below)
> autologin = 30,31, ; lines list. You can add an empty line for an
> empty button (7960, 7970, 7940, 7920)
> description = jj7970 ; internal description. Not
> important
> tzoffset = -9
> transfer = on ; enable or disable the transfer
> capability. It does remove the transfer softkey
> park = on ; take a look to the
> compile howto. Park stuff is not compiled by default
> speeddial = ; you can add an empty speedial
> if you want an empty button (7960, 7970, 7920)
> speeddial = *97,voicemail,
>
> cfwdall = off ; activate the callforward stuff
> and softkeys
> cfwdbusy = off
> dtmfmode = inband ; inband or outofband.
> outofband is the native cisco dtmf tone play.
> ; Some phone model does
> not play dtmf tones while connected (bug?), so the default is inband
> imageversion = P00405000700 ; useful to upgrade old
> firmwares (the ones that do not load *.xml from the tftp server)
> deny=0.0.0.0/0.0.0.0 ; Same as general
> permit=192.168.1.90/255.255.255.255 ; This device can register only
> using this ip address
> dnd = on ; turn on the dnd
> softkey for this device. Valid values are "off", "on" (busy signal),
> "reject" (busy signal), "silent" (ringer = silent)
> trustphoneip = no ; The phone has a ip
> address. It could be private, so if the phone is behind NAT
> ; we don't have to trust
> the phone ip address, but the ip address of the connection
> ;earlyrtp = none ; valid options: none,
> offhook, dial, ringout. default is none.
> ; The audio strem will
> be open in the progress and connected state.
> private = on ; permit the private function
> softkey for this device
> mwilamp = on ; Set the MWI lamp style when
> MWI active to on, off, wink, flash or blink
> mwioncall = off ; Set the MWI on call.
> device => SEP00131A1F6366 ; device name SEP<MAC>
>
> [lines]
>
> id = 30 ; future use
> pin = 1234 ; future use
> label = 30 ; button line label (7960, 7970,
> 7940, 7920)
> description = Line 30 ; top diplay description
> context = from-internal ; sccp
> incominglimit = 2 ; more than 1 incoming
> call = call waiting.
> transfer = on ; per line transfer capability.
> on, off, 1, 0
> mailbox = 30 ; voicemail.conf (syntax:
> vmbox[@context][:folder])
> vmnum = *97 ; speeddial for
> voicemail administration, just a number to dial
> cid_name = JJJ ; caller id name
> cid_num = 30
> trnsfvm = 1000 ; extension to redirect the
> caller (e.g for voicemail)
> secondary_dialtone_digits = 9 ; digits for the secondary
> dialtone (max 9 digits)
> secondary_dialtone_tone = 0x21 ; outside dialtone
> musicclass=default ; Sets the default music on hold
> class
> language=en ; Default language setting
> ;accountcode=79501 ; accountcode to ease billing
> rtptos = 184 ; sets the the rtp packets TOS
> for this line
> echocancel = on ; sets the phone echocancel for
> this line
> silencesuppression = off ; sets the silence suppression
> for this line
> ;callgroup=1,3-4 ; We are in caller
> groups 1,3,4. Valid for this line
> ;pickupgroup=1,3-5 ; We can do call pick-p for call
> group 1,3,4,5. Valid for this line
> ;amaflags = ; Sets the default AMA flag code
> stored in the CDR record for this line
> line => 30
>
> (do the same for line 31)
>
> 2.) setup lines 30/31 as a custom extension in astersik (i used amp)
> and had it dial SCCP/30 and SCCP/31 as needed
>
>
> 3.) setup /tftpboot config for SEP<MAC>.xml
>
> <device xsi:type="axl:XIPPhone">
> <devicePool>
> <name>Default</name>
> <dateTimeSetting>
> <name>CMLocal</name>
> <dateTemplate>y-M-D</dateTemplate>
> <timeZone>W. Europe Standard/Daylight Time</timeZone>
> </dateTimeSetting>
> <callManagerGroup>
> <members>
> <member priority="0">
> <callManager>
> <ports>
>
> <ethernetPhonePort>2000</ethernetPhonePort>
> </ports>
> <processNodeName>(ASTERISK IP HERE)</processNodeName>
> </callManager>
> </member>
> </members>
> </callManagerGroup>
> <srstInfo>
> <name>Enable</name>
> <srstOption>Enable</srstOption>
> <userModifiable>true</userModifiable>
> <ipAddr1>(ASTERISK IP HERE)</ipAddr1>
>
> <port1>2000</port1>
> <ipAddr2></ipAddr2>
> <port2>2000</port2>
> <ipAddr3></ipAddr3>
> <port3>2000</port3>
> </srstInfo>
> <mlppDomainId>-1</mlppDomainId>
> <mlppIndicationStatus>Default</mlppIndicationStatus>
> <preemption>Default</preemption>
> </devicePool>
> <loadInformation></loadInformation>
>
> <vendorConfig>
> <disableSpeaker>false</disableSpeaker>
> <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
> <forwardingDelay>1</forwardingDelay>
> <pcPort>0</pcPort>
> <settingsAccess>1</settingsAccess>
> <garp>0</garp>
> <voiceVlanAccess>0</voiceVlanAccess>
> <videoCapability>1</videoCapability>
>
> <autoSelectLineEnable>0</autoSelectLineEnable>
> <webAccess>1</webAccess>
> <daysDisplayNotActive>1,7</daysDisplayNotActive>
> <displayOnTime>08:30</displayOnTime>
> <displayOnDuration>11:30</displayOnDuration>
> <displayIdleTimeout>01:00</displayIdleTimeout>
> </vendorConfig>
> <versionStamp></versionStamp>
> <userLocale>
> <name></name>
> <uid>1</uid>
>
> <langCode>en</langCode>
> <version>4.0(1)</version>
> <winCharSet>iso-8859-1</winCharSet>
> </userLocale>
> <networkLocale></networkLocale>
> <networkLocaleInfo>
> <name></name>
> <uid>64</uid>
> <version>4.0(1)</version>
> </networkLocaleInfo>
> <deviceSecurityMode>1</deviceSecurityMode>
>
> <idleTimeout>120</idleTimeout>
> <authenticationURL></authenticationURL>
> <directoryURL>http://192.168.1.240/directory.php</directoryURL>
> <idleURL></idleURL>
> <informationURL></informationURL>
> <messagesURL></messagesURL>
> <proxyServerURL></proxyServerURL>
> <servicesURL>http://192.168.1.240/services.php</servicesURL>
> <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
> <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
> <dscpForCm2Dvce>96</dscpForCm2Dvce>
> </device>
>
>
>
>
>
>
>
>
>
> Tomislav Parčina wrote:
> > I have search wiki, asteriskguru, chan_sccp and some other site's for
> information's how to upgrade, and make Cisco 7970 IP phone to work with
> asterisk on SCCP firmware.
> >
> > I'm sure that there are users on this group that have working Cisco 7970
> phone. Please send me some information's how to do that.
> >
> >
> > --
> > Tomislav Parcina
> > tparcina#lama.hr
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
Agur Koort
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060328/53cf8b2c/attachment.htm
More information about the asterisk-users
mailing list