[Asterisk-Users] welltech Wellgate 3804 in SIP mode

[Erick Perez]

Martin,  i guess im in dumb mode today because i don't get what you say, may
also be because this will be my first welltech to configure.
what im trying to do is:

remote_voip_gateway-------->asterisk----------->fox/fxs/and_international_voip_providers
call will always go -----> this way, no incoming calls from the right of the
diagram side to asterisk.



On 3/23/06, Martin Joseph <ast at stillnewt.org> wrote:
>
>
> On Mar 22, 2006, at 10:24 PM, Erick Perez wrote:
>
> > Hi, does anybody have a working config or tips to connect the welltech
> > wellgate 3804 (4fxo) unit to asterisk via SIP ?
> > I think I register it via SIP with my * box, but when sending calls
> > from * to the wellgate the unit does not pass the call to any of the
> > fxo ports.
> >
>
> I am using the 3701a, which is a 1 FXO 1 FXS deal.
>
> The trick for me was the "routing table"  or something like that from
> the Web based configuration screen.  There I changed the default for
> the FXO to point to IP, and the IP to default to the FXO.
>
> Then I also have the "line configuration" set so the extension I want
> to ring ie 2020 is the "hotline" for the FXO.
>
> For outbound ones, I think I just have a regular old
> Dial(SIP/${EXTEN}@2003} in my dialplan where 2003 is the FXO port.
>
> HTH?
> Marty
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



--

-------------------------------------------
Erick Perez
Linux User 376588
http://counter.li.org/  (Get counted!!!)
Panama, Republic of Panama
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060325/7b9f3544/attachment.htm