[Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI

Thu Mar 23 07:56:20 MST 2006

Hello Henk,

"1013" was the number that I tried to call. In France, it's the number 
to call the operator France Telecom.
I've also tried to call another number without success.

I will make some tests this evening with the answers that I received via 
this mailing-list.

Thank you.

Henk Dick a écrit :
> I think that you are sending an outgoing caller id that is not part of the
> DID range.  Most operators do not allow this.
>
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '1013' ]
>
> Are you using caller id "1013" ?
>
> Change it to a number that is part of your trunks.
>
> Henk
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sébastien
> Mortier
> Sent: maandag 20 maart 2006 11:52
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] ISDN Protocol Unknom Error with Junghanns OctoBRI
>
> Hello,
>
> I recently bought a Junghanns Octobri Card. I have some problems with 
> this card to make outbound calls but I can receive calls.
>
> I have 3 lines to PSTN and 3 lines to my existing PBX
>
>    FRANCE TELECOM <-- OctoBRI --> Asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h 
> <-- OctoBRI --> PABX e-Generis <----> ISDN Phones
>                                            |
>                                            |
>                                       SIP Phones
>
>
> France Telecom --> SIP Phones : Works
> France Telecom --> ISDN Phones : Works
> SIP Phones ------> ISDN Phones : Works
> ISDN Phones -----> SIP Phones : Works
> SIP Phones ------> France Telecom : DOESN'T WORK
> ISDN Phones -----> France Telecom : DOESN'T WORK
>
>
> Here are some characteristics of my Asterisk Setup
>
> OS Linux Gentoo 2.6.15-r1
>
> zaptel 1.2.3
> libpri 1.2.2
> asterisk 1.2.4-BRIstuffed-0.3.0-PRE-1h
> ISDN Lines : EuroISDN not EuroISDN+
>
> Junghanns OctoBRI PCI ISDN Card
> S/T 1+8 - S/T 2+7 : TE Mode
> S/T 3+6 - S/T 4+5 : NT Mode
> modprobe qozap ports=60
>
>
> zaptel.conf
> -----------
>
>
> loadzone=fr
> defaultzone=fr
> # qozap span definitions
> # most of the values should be bogus because we are not really zaptel
> span=1,1,3,ccs,ami
> span=2,0,3,ccs,ami
> span=3,0,3,ccs,ami
> span=4,0,3,ccs,ami
> span=5,1,3,ccs,ami
> span=6,0,3,ccs,ami
> span=7,0,3,ccs,ami
> span=8,0,3,ccs,ami
>
> bchan=1,2
> dchan=3
> bchan=4,5
> dchan=6
> bchan=7,8
> dchan=9
> bchan=10,11
> dchan=12
> bchan=13,14
> dchan=15
> bchan=16,17
> dchan=18
> bchan=19,20
> dchan=21
> bchan=22,23
> dchan=24
>
>
>
> -----------
> zapata.conf
> -----------
>
> switchtype = euroisdn
> pridialplan = dynamic
> prilocaldialplan = local
> nationalprefix = 0
> internationalprefix = 00
> usecallingpres = yes
> echocancel = yes
> echocancelwhenbridged = yes
> echotraining = 100
> callprogress=yes
>
>
> context=isdn-incoming
> group = 1
>
> ; S/T port 1,2,7,8
> channel => 1-2
> channel => 4-5
> ;channel => 19-20
> channel => 22-23
>
> context=pbx-incoming
> group = 2
>
> channel => 7-8
> channel => 10-11
> ;channel => 13-14
> channel => 16-17
>
>
> ---------
> Here's the output BRI debug when I try to make outbound calls from a SIP 
> phone :
>
>
>
> -- Executing Dial("SIP/400-c8dc", "Zap/1/1013")
> 1 -- Making new call for cr 137
> -- Requested transfer capability: 0x00 - SPEECH
> 1 > Protocol Discriminator: Q.931 (Cool len=26
> 1 > Call Ref: len= 1 (reference 9/0x9) (Originator)
> 1 > Message type: SETUP (5)
> 1 > [1 041 031 801 901 a31 ]
> 1 > Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer 
> capability: Speech (0)
> 1 > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
> 1 > Ext: 1 User information layer 1: A-Law (35)
> 1 > [1 181 011 811 ]
> 1 > Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, 
> Preferred Dchan: 0
> 1 > ChanSel: B1 channel
> 1 ]
> 1 > [1 6c1 051 411 801 341 301 301 ]
> 1 > Calling Number (len= 7) [ Ext: 0 TON: Subscriber Number (4) NPI: 
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> 1 > Presentation: Presentation permitted, user number not screened (0) 
> '400' ]
> 1 > [1 701 051 c11 311 301 311 331 ]
> 1 > Called Number (len= 7) [ Ext: 1 TON: Subscriber Number (4) NPI: 
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '1013' ]
> -- Called 1/1013
> 1 < Protocol Discriminator: Q.931 (Cool len=8
> 1 < Call Ref: len= 1 (reference 137/0x89) (Terminator)
> 1 < Message type: RELEASE COMPLETE (90)
> 1 < [1 081 021 871 e41 ]
> 1 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 
> Location: International network (7)
> 1 < Ext: 1 Cause: Unknown (100), class = Protocol Error (6) ]
> 1 -- Processing IE 8 (cs0, Cause)
> -- Channel 0/1, span 1 got hangup, cause 100
> 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> 1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> -- Hungup 'Zap/1-1'
> == Everyone is busy/congested at this time (1:0/0/1)
> -- Executing Hangup("SIP/400-c8dc", "")
> == Spawn extension (default, 1013, 2) exited non-zero on 'SIP/400-c8dc'
> 1 received TEI check request for TEI = 127
>
>
> I've already tested several configurations for zapata.conf especially 
> with the pridialplan and switchtype lines but without success.
>
> Could you help me to analyse and solve this odd problem ?
> Thank you in advance,
>
>
>   

-- 
Sébastien Mortier
AbsysTech
Tel : +33 3 20 50 99 02
Fax : +33 3 20 74 50 05
Gsm : +33 6 20 79 24 29

http://www.absystech.fr