[Asterisk-Users] Trouble installing a digium TE405P card

[Mads B. Tandrup]

I am having trouble installing a digium TE405P card.
The machine is an HP DX2000 with Suse 10.

I have successfully compiled and installed the
zaptel-1.2.4 source code.

After compilation i added the following lines to the
/etc/udev/rules.d/ folder:
KERNEL="zapctl",     NAME="zap/ctl"
KERNEL="zaptimer",   NAME="zap/timer"
KERNEL="zapchannel", NAME="zap/channel"
KERNEL="zappseudo",  NAME="zap/pseudo"
KERNEL="zap[0-9]*",  NAME="zap/%n"

When doing a modprobe zaptel the zaptel module i
quitely loaded.
But when I do a modprobe wct4xxp I get:
ZT_SPANCONFIG failed on span 1: No such device or
address (6)
FATAL: Error running install command for wct4xxp

After modprobing lsmod includes:
wct4xxp                89536  0
zaptel                187268  1 wct4xxp
crc_ccitt               2176  1 zaptel

The /dev folder looks like this:
# ls -l /dev/z*
/dev/zap:
total 0
crw-rw----   1 root root 196, 254 Mar 23 13:24 channel
crw-rw----   1 root root 196,   0 Mar 23 13:24 ctl
crw-rw----   1 root root 196, 255 Mar 23 13:24 pseudo
crw-rw----   1 root root 196, 253 Mar 23 13:24 timer

The /proc/zaptel folder is empty

After doing a modprobe zaptel the following is written
to dmesg:
zaptel: module not supported by Novell, setting U
taint flag.
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.4 Echo Canceller: KB1

As for modprobe wct4xxp this is written to dmesg:
wct4xxp: module not supported by Novell, setting U
taint flag.
PCI: Found IRQ 7 for device 0000:01:00.0
Found TE4XXP at base address fe5ffc00, remapped to
d0888c00
TE4XXP version c01a0164, burst OFF, slip debug: OFF
FALC version: 00000005, Board ID: 0d
Reg 0: 0x014e4400
Reg 1: 0x014e4000
Reg 2: 0xffffffff
Reg 3: 0x00000000
Reg 4: 0x00000001
Reg 5: 0x00000000
Reg 6: 0xc01a0164
Reg 7: 0xd0001f00
Reg 8: 0x00000000
Reg 9: 0x00ff0000
Reg 10: 0x00000000
Found a Wildcard: Wildcard TE405P (2nd Gen)

The card is identified as "Unknown device" in lspci:
01:00.0 Communication controller: Unknown device
d161:0405 (rev 02)
        Flags: bus master, medium devsel, latency 32,
IRQ 7
        Memory at fe5ffc00 (32-bit, non-prefetchable)
[size=128]

# cat /proc/interrupts
           CPU0
  0:    1347724          XT-PIC  timer
  1:         14          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  7:          5          XT-PIC  wct4xxp
  8:          2          XT-PIC  rtc
 11:      16784          XT-PIC  Intel ICH5, eth4
 12:         93          XT-PIC  i8042
 14:      14588          XT-PIC  ide0
 15:      47987          XT-PIC  ide1

Any idea as to what might cause the problem?

Best regards,
Mads




		
___________________________________________________________ 
Yahoo! Photos – NEW, now offering a quality print service from just 8p a photo http://uk.photos.yahoo.com