[Asterisk-Users] Re: MeetMe 'i' option not working correctly?

[Dinesh Nair]

On 03/09/06 16:41 Tony Mountifield said the following:
> In article <FE69D4BFFC77324F8B0F54E87E8497B6014066DC at EVS-GREEN.coloflorida.com>,
> Jon Webster <jon.webster at elephantoutlook.com> wrote:
> 
>>I'm running 2.4.5 and app_meetme never plays conf-hasleft or
>>conf-hasjoined with user names. I looked at app_meetme.c, but couldn't
>>determine the cause. Any suggestions are greatly appreciated.
>>
>>exten => 600,1,MeetMe(600|i) I get the following:
>>
>>  -- Executing MeetMe("SIP/jon-21f8", "600|aciMps") in new stack
>>  == Parsing '/etc/asterisk/meetme.conf': Found
>>Mar  8 06:13:53 WARNING[5197]: channel.c:2535 ast_request: No channel
>>type registered for 'zap'
>>Mar  8 06:13:53 WARNING[5197]: app_meetme.c:461 build_conf: Unable to
>>open pseudo channel - trying device
> 
> 
> The above messages indicate that chan_zap.so isn't loaded. Possibly it
> isn't even built. You need to build *and install* zaptel before starting
> to build Asterisk. Asterisk will find the zaptel libraries and will
> build chan_zap.

MeetMe requires a timing device, you'd need either a zaptel line card or to 
load ztdummy to provide pseudo timing.

-- 
Regards,                           /\_/\   "All dogs go to heaven."
dinesh at alphaque.com                (0 0)    http://www.alphaque.com/
+==========================----oOO--(_)--OOo----==========================+
| for a in past present future; do                                        |
|   for b in clients employers associates relatives neighbours pets; do   |
|   echo "The opinions here in no way reflect the opinions of my $a $b."  |
| done; done                                                              |
+=========================================================================+