[Asterisk-Users] RE: Problems with installing a TE110P on a Dell Poweredge 850

[John Fulton]

Although this is a T1, this is NOT running a PRI. It is running with 
2 DSS voice trunks using fxs groundstart. Is that not possible with this card?

At 08:53 PM 3/14/2006, chan \(Alpha Trilogies Networks\) wrote:
>Please check your zaptel,
>TE110P is the T1/E1, you should state the parameter accordingly.
>
>/etc/zaptel.conf
>------------------------------------------
>span=1,0,0,esf,b8zs
>fxsgs=1 ..................................where is your d-, b- channels?
>loadzone=us
>defaultzone=us
>
>Your mistake!
>[channels]
>context=default
>switchtype=national
>signalling=fxo_ls .....................it must be the same as zaptel.conf
>
>possible start thhe asterisk
># asterisk
># asterisk -cvvvvvvvv
>Debug the output of the status ....
>
>
>This is my advice.