[Asterisk-Users] misdn problem
asterisk at frameweb.it
asterisk at frameweb.it
Wed Mar 15 08:25:01 MST 2006
Thank you for your answer.
I tried that syntax with misdn/g:TEports/${EXTEN}, but nothing changes.
what should I write in the /etc/capi.conf ?
If I had a Fritz, I would have
#SuSEconfig.isdn generated
# card file proto io irq mem cardnr options
fcpci - - - - - 1
but having 2 billion ??? what to write ?
Andrea
DRi at b-w-computer.
de
Sent by: To
asterisk-users-bo Asterisk Users Mailing List -
unces at lists.digiu Non-Commercial Discussion
m.com <asterisk-users at lists.digium.com>
cc
15/03/2006 14.56 Subject
Re: [Asterisk-Users] misdn problem
Please respond to
Asterisk Users
Mailing List -
Non-Commercial
Discussion
<asterisk-users at l
ists.digium.com>
asterisk-users-bounces at lists.digium.com wrote on 15.03.2006 14:37:27:
> I am trying to use misdn insted of zaphfc to drive two billion isdn
cards
> zaphfc is ok, but the problem with cdr and the fact tha you always have
to
> wait the bristuffed version of asterisk took me to
> try another way.
> so I downloaded the misdn installation script from beronet for the last
> version ( I am using asterisk stable 1.2, so now is 1.2.5)
> wget http://www.beronet.com/downloads/install-misdn-mqueue.tar.gz
>
> tar -zxvf install-misdn-mqueue.tar.gz
> cd /usr/src/install-misdn-mqueue
> make
> make install
> everything OK
>
> /etc/init.d/misdn-init scan
>
> /etc/init.d/misdn-init config
>
> /etc/init.d/misdn-init start
> everything OK
>
> then I modify the /etc/asterisk/misdn.conf, in a very standard way:
>
> [general]
> debug=0
> method=standard
> append_digits2exten=yes
> bridging=yes
> ;tracefile=/var/log/asterisk/misdn.trace
>
> [default]
> immediate=yes
> callgroup=1
> pickupgroup=1
> context=default
> language=it
> ;nationalprefix=0
> ;internationalprefix=00
> rxgain=0
> txgain=0
> dialplan=0
>
> [TEports]
> ports=1,2
> context=from-pstn
> msns=*
> ~
>
> then:
>
> chmod 755 /usr/lib/asterisk/modules
>
> chown asterisk /dev/mISDN* -R
> everything still OK
>
> amportal start (I am using AMP )
>
> OK.
> when I try to access an external line, asterisk crashes with a
segmentation
> fault;
> the dial string is correct
> ...
> -- Executing GotoIf("SIP/567-bb09", "1?20:21") in new stack
> -- Goto (macro-dialout-trunk,s,20)
> -- Executing SetVar("SIP/567-bb09", "the_num=3481303063") in new
stack
> -- Executing Dial("SIP/567-bb09", "misdn/1/3481303063") in new stack
> -- Called 1/3481303063
> Ouch ... error while writing audio data: : Broken pipe
> Segmentation fault (core dumped)
>
> I am using Suse Linux 10, and I switched to default kernel (not SMP)
> asterisk at asterisk01:~> uname -r
> 2.6.13-15.8-default
>
> Any help will be gratly appreciated.
> by the way: I read it could be possible to use chan_capi insted of
> chan_misdn, laying on misdn: is it correct: ?
>
> And if it is, could anybody give me an advice on how ? I tried the 0.6.4
> chan_capi version I succesfully installed on anothe box with Fritz!,
> but in that case the capi driver for Fritz was present.
>
> thank in advance,
> Andrea
maybe try to dial via Dial(misdn/g:TEports/${EXTEN}) inside
extensions.conf
I encountered a few asterisk-crashes with mISDN as well
as it seems misdn doesn't like digital calls at all and is crashing in
this case...
yes, it's possible to use chan_capi via misdn/capi you just have to add
entries for the hfc-cards to your /etc/capi.conf
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
Chi ricevesse questa mail per errore e' gentilmente pregato di cancellarla.
Visitate il sito http://www.frameweb.it
More information about the asterisk-users
mailing list