[Asterisk-Users] problem configuring a digium quad E1 card

[David Masure]

Hi,
 
I bought a Digium Quad E1 card  model TE406P.  Till now, I can't make it
work...
 
I mean, I have red alarm when I configure one E1.  The provider is in
France (France Télécom) and I use the following zaptel config :
 

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
 
I'm using Linux 2.6.15 and when I run ztcfg -vvvv, it seems that all
channels are configured...
 
So can someone give me an advice on that matter... maybe someone in
France who already configured that type of access.
 
Also, I would like that you confirm the type of cable which can be used
to connect the card to the Telco : can I use a straight cable or use a
crossed cable with pair 1-2 connect to 4-5 ?
 
Thanks
 
Best regards!
 
David
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060315/7ef7d00d/attachment.htm