[Asterisk-Users] AVM C2 chan_capi-cm-0.6.3 Error on Dial

[John Daragon]

I'm getting a strange error on one of the two controllers on an AVM C2
card under chan_capi-cm-0.6.3.

I have two ISDN controllers defined, both in the same group, both
connections are UK ISDN2e Point to Point:

On the third outbound call (both of the first two calls are handled by
the second controller "ISDN2",) I get this error :

chan_capi.c conf_error 0x2001 PLCI=0x301 Command=CONNECT_B3_CONF,0x8487

Does anyone have any idea what's going on here ? BT tell me there's no
problem they can see with the ISDN line involved.

jd



This is the dialstring :

exten => _9.,1,SetCallerPres(allowed)
exten => _9.,2,SetCIDNum(252000)
exten => _9.,3,Dial(CAPI/g1/${EXTEN:1}/b)
exten => _9.,4,Congestion


/etc/capi.conf contains :

c2	c2.bin	DSS1 - - - - P2P
c2	c2.bin	DSS1 - - - - P2P


/etc/asterisk/capi.conf contains :

[general]
nationalprefix=0
internationalprefix=00
rxgain=0.9
txgain=0.3

; interface sections ...

[ISDN1]
isdnmode=DID
incomingmsn=*
controller=1
group=1
softdtmf=on
relaxdtmf=on
accountcode=
context=capi-in
holdtype=hold
echocancel=yes
echotail=64
bridge=yes
callgroup=1
devices=2


[ISDN2]
isdnmode=DID
incomingmsn=*
controller=2
group=1
softdtmf=on
relaxdtmf=on
accountcode=
context=capi-in
holdtype=hold
echocancel=yes
echotail=64
bridge=yes
callgroup=1
devices=2