[Asterisk-Users] Clustering

Douglas Garstang dgarstang at oneeighty.com
Mon Mar 13 09:06:40 MST 2006


Yes, people mention DUNDi ocassionaly. It's a shame it's completely useless as their is no documentation for it.

-----Original Message-----
From: Kristian Larsson [mailto:kristian at netatonce.se]
Sent: Monday, March 13, 2006 8:43 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Clustering


On Mon, Mar 13, 2006 at 08:12:40AM -0700, Douglas Garstang wrote:
> Thanks Kristian. It isn't clear how this means a registration on one Asterisk system magically appear on the other though...
I'm not quite certain as I build my call routing
on scripts instead of Asterisk built in commands,
but I beleive Dundi should be able to help you out
in situations like this.

   Kristian
> 
> -----Original Message-----
> From: Kristian Larsson [mailto:kristian at netatonce.se]
> Sent: Monday, March 13, 2006 12:22 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Clustering
> 
> 
> On Fri, Mar 10, 2006 at 08:20:27PM -0700, Douglas Garstang wrote:
> > Kevin,
> >  
> > From the voip wiki at http://www.voip-info.org/wiki-Asterisk+sip+regcontext:
> >  
> > "If regcontext is specified, Asterisk will dynamically create and destroy a NoOp priority 1 extension for a given peer who registers or unregisters with us"
> Pretend we have peer 123456, then put
> 
> exten => 123456,2,Dial(SIP/123456)
> 
> in your extensions.conf
> When phone 123456 becomes available and registers
> to the Asterisk, the dialplan will look like:
> 
> exten => 123456,1,NoOp
> exten => 123456,2,Dial(SIP/123456)
> 
> and as you know the dialplan always begin on
> priority 1 so if the phone is not registered you
> don't automatically move to priority 2.
> 
> What I'm curious to know is whether there is a way
> to use this with SIP RealTime... there doesn't
> seem to exist a setting for both regexten and
> regcontext. Any pointers?
> 
>    Kristian.
> 
> > What does this mean exactly? How is it used? I've read the same piece of information dozens of times over the last few months and it makes as much sense to me today, as it did back then, which is about zero.
> >  
> > Wow... IAX can be used to share registration info? I've never seen that mentioned anywhere. After reading the patchy docs on DUNDi, I kind of got the impression that it _might_ be able to do that sort of thing, but the docs where so bad they where useless. And while we're on the discussion topic, why doesn't Digium release some docs on DUNDi? It's their baby after all. It seems to be that almost no one uses it, simply because there's no docs that explain how to do it.
> >  
> > Alternatively, if you don't have time, can you point me to anywhere where instructions on how to use regcontent is succinctly and clearly documented and explained?
> >  
> > Doug.
> >  
> > 
> > 	-----Original Message----- 
> > 	From: Kevin P. Fleming [mailto:kpfleming at digium.com] 
> > 	Sent: Fri 3/10/2006 8:05 PM 
> > 	To: Asterisk Users Mailing List - Non-Commercial Discussion 
> > 	Cc: 
> > 	Subject: Re: [Asterisk-Users] Clustering
> > 	
> > 	
> > 
> > 	Douglas Garstang wrote:
> > 	
> > 	> I'd just die to see an example of that. I've never seen an example that actually works. I quite distinctly remember reading somewhere (sorry, forget where) that this command was broken.
> > 	
> > 	It's not broken. If you find some official documentation that says so,
> > 	then it needs to be fixed. If you read it somewhere else, then that
> > 	source is not something you should trust.
> > 	
> > 	regexten in sip.conf works just fine; it can easily be used to make an
> > 	extension 'appear' and 'disappear' from the desired context based on the
> > 	status of the peer's registration. If that context is then shared among
> > 	the Asterisk servers (via DUNDi, IAX2 switches or some other technique),
> > 	then calls to that extension will be handled by the server it registered
> > 	to automatically.
> > 	_______________________________________________
> > 	--Bandwidth and Colocation provided by Easynews.com --
> > 	
> > 	Asterisk-Users mailing list
> > 	To UNSUBSCRIBE or update options visit:
> > 	   http://lists.digium.com/mailman/listinfo/asterisk-users
> > 	
> > 
> 
> 
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> > 
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> -- 
> Kristian Larsson, Net At Once AB
> Email: kristian at netatonce.se
> Phone: +46 470 592717
> Cell: +46 704 910401
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
Kristian Larsson, Net At Once AB
Email: kristian at netatonce.se
Phone: +46 470 592717
Cell: +46 704 910401
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list