[Asterisk-Users] Re: Zap not installing

[Curt Shaffer]

This issue has been solved. What I found was that Asterisk at Home was running
a newer version of udev. Once I installed the newer version it came right
up. The version udev-039-10.10.EL4.3 works like a charm! Hope that helps
someone out there.

Curt

On 3/8/06, Curt Shaffer <cshaffer at gmail.com> wrote:
>
>  I have decided to move on from Asterisk at Home and start compiling asterisk
> myself now. I got a dedicated box and put my X100P in it. I installed the
> server version of CentOS 4.2 (2.6.9-22.EL kernel) barebones. The box is a
> dell GX270 workstation with 1GB of RAM. I got a fresh copy of O'Reilly's
> Asterisk the future of technology and begun. I downloaded the zaptel -
> 1.2.4.tar.gz, libpri-1.0.9, and asterisk-1.2.5. I started compiling the
> zaptel (make && make install && make clean) when I try to start zaptel ->
> /etc/init.d/zaptel start I get the following error:
>
>
>
> Loading zaptel framework:  FATAL: Module zaptel not found
>
> Unable to open /dev/zap/ctl: No such file or directory
>
>
>
> Below are the only things I have declared in my /etc/zaptel.conf
>
>
>
> ks=1
>
> loadzone=us
>
> defaultzone=us
>
> fxoks=1 ( I have tried fxsks=1 as well, because the book had a section
> that read the following):
>
>
>
> "...a physical FXO port will be defined in configuration with FXS
> signaling..an FXO card connects to a central office(CO), which means it will
> need to behave like a station that use FXS signaling"
>
>
>
> I tried this both in /etc/udev/rules.d/50-udev.rules and
> /etc/udev/rules.d/zaptel.rules (rebooting after each change)
>
>
>
> Zaptel devices
>
> KERNEL="zapctl",     NAME="zap/ctl"
>
> KERNEL="zaptimer",   NAME="zap/timer"
>
> KERNEL="zapchannel", NAME="zap/channel"
>
> KERNEL="zappseudo",  NAME="zap/pseudo"
>
> KERNEL="zap[0-9]*",  NAME="zap/%n"
>
>
>
> When I run ztcfg I get the following error:
>
>
>
> line 0: Unable to open master device '/dev/zap/ctl'
>
>
>
> When I run zttool I get the following error:
>
>
>
> Unable to open /dev/zap/ctl: No such file or directory
>
>
>
> I have started from scratch multiple times and I get the same result.
>
>
>
> I get no errors when compiling and the card can be removed and put back in
> the old system and work properly. Also Linux does notice the device when I
> install and boot into the OS.
>
>
>
> Any help would be appreciated.
>
>
>
> Curt
>
>
>
>
>
>
>
>
>



--
Curt Shaffer, Network+,MCP, MCSA
202-558-2408 (home)
1-309-412-4809 (efax)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060312/65699d45/attachment.htm