[Asterisk-Users] FW: I need to set NO CRC4 on zaptel.conf?
ADEGOKE ARUNA
goksie at gmail.com
Sat Mar 11 05:16:30 MST 2006
Hi all,
Can somebody help me out, to get the call going through to my provider?
I connected my A104D Sangoma card to E1/isdn and each I tried to make call I
get the errors below.
My protocol analyzer can see only setup info and release complete.
WIRELESS2*CLI> set debug 9
Core debug was 0 and is now 9
WIRELESS2*CLI> pri intense debug span 1
Enabled EXTENSIVE debugging on span 1
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (4)
> [ 00 01 01 09 ]
> Supervisory frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 004 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
WIRELESS2*CLI>
< [ 00 01 01 09 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 004 P/F: 1
< 0 bytes of data
-- ACKing all packets from 3 to (but not including) 4
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
-- Accepting AUTHENTICATED call from 10.80.1.151:
> requested format = alaw,
> requested prefs = (),
> actual format = gsm,
> host prefs = (gsm),
> priority = mine
-- Executing Dial("IAX2/marko-2", "Zap/g1/08023717175|60|Ttr") in new
stack
-- Requested transfer capability: 0x00 - SPEECH
WIRELESS2*CLI>
> [ 00 01 08 08 08 02 00 05 05 04 03 80 90 a3 18 04 e9 81 83 82 6c 0a 21 81
31 3
6 32 31 30 30 30 30 70 0c a1 30 38 30 32 33 37 31 37 31 37 35 a1 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 004 0: 0
> N(R): 004 P: 0
> 43 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=43
> Call Ref: len= 2 (reference 5/0x5) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: S
peech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16
)
> Ext: 1 User information layer 1: A-Law (35)
> [18 04 e9 81 83 82]
> Channel ID (len= 6) [ Ext: 1 IntID: Explicit, PRI Spare: 0, Exclusive
Dchan:
0
> ChanSel: Reserved
> Ext: 1 DS1 Identifier: 1
> Ext: 1 Coding: 0 Number Specified Channel Type:
3
> Ext: 1 Channel: 2 ]
> [6c 0a 21 81 31 36 32 31 30 30 30 30]
> Calling Number (len=12) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephon
y Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation permitted, user
number pa
ssed network screening (1) '16210000' ]
> [70 0c a1 30 38 30 32 33 37 31 37 31 37 35]
> Called Number (len=14) [ Ext: 1 TON: National Number (2) NPI:
ISDN/Telephony
Numbering Plan (E.164/E.163) (1) '08023717175' ]
> [a1]
> Sending Complete (len= 1)
-- Called g1/08023717175
WIRELESS2*CLI>
< [ 00 01 01 0a ]
WIRELESS2*CLI>
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 005 P/F: 0
< 0 bytes of data
-- ACKing all packets from 3 to (but not including) 5
-- ACKing packet 4, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
WIRELESS2*CLI>
< [ 02 01 08 0a 08 02 80 05 5a 08 03 82 e4 18 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 004 0: 0
< N(R): 005 P: 0
< 10 bytes of data
-- ACKing all packets from 4 to (but not including) 5
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=10
< Call Ref: len= 2 (reference 5/0x5) (Terminator)
< Message type: RELEASE COMPLETE (90)
< [08 03 82 e4 18]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Pub
lic network serving the local user (2)
< Ext: 1 Cause: Unknown (100), class = Protocol Error (6)
]
< Cause data 1: 18 (24)
Sending Receiver Ready (5)
> [ 02 01 01 0a ]
WIRELESS2*CLI>
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 005 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
-- Channel 1/2, span 1 got hangup
-- Channel 1/2, span 1 received AOC-E charging 0 units
-- Hungup 'Zap/2-1'
== No one is available to answer at this time (1:0/0/0)
== Auto fallthrough, channel 'IAX2/marko-2' status is 'NOANSWER'
-- Hungup 'IAX2/marko-2'
T203 counter expired, sending RR and scheduling T203 again
Sending Receiver Ready (5)
> [ 00 01 01 0b ]
> Supervisory frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 005 P/F: 1
> 0 bytes of data
-- Restarting T203 counter
WIRELESS2*CLI>
< [ 00 01 01 0b ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 000 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 005 P/F: 1
< 0 bytes of data
-- ACKing all packets from 4 to (but not including) 5
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
-- Got RR response to our frame
-- Restarting T203 counter
Zaptel.conf
loadzone = uk
defaultzone = uk
#span definitions
span = 1,1,0,ccs,hdb3,crc4,yellow
span = 2,2,0,ccs,hdb3,crc4,yellow
span = 3,3,0,ccs,hdb3,crc4,yellow
span = 4,4,0,ccs,hdb3,crc4,yellow
#channel definitions
#bchan = 1-15, 17-31, 32-46, 48-62, 63-77, 79-93, 94-108, 110-124
#dchan = 16,47,78,109
bchan = 1-15,17-124
dchan = 16
my wanpipe1.conf
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 13
PCIBUS = 6
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
goksie
More information about the asterisk-users
mailing list